103006853

MS-AZ 200ST-T-1P2P-2568

103006853

103006853

103006853

103006853

103006853

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

Electrical data - Safety digital inputs

Switching thresholds: −3 V … 5 V (Low) | 15 V … 30 V (High)
Current consumption at 24 V: 5 mA

Electrical data

Operating voltage: 24 VDC -15 % / +10 %
No-load supply current I: 100 mA
Rated operating voltage: 24 VDC
Operating current: 50 mA
Time to readiness, maximum: 4,000 ms
Switching frequency, approx.: 1 Hz

Mechanical data - Dimensions

Length of sensor: 50 mm
Width of sensor: 40 mm
Height of sensor: 220 mm

Pin assignment

PIN 1: A1 Supply voltage UB
PIN 2: X1 Safety input 1
PIN 3: A2 GND
PIN 4: Y1 Safety output 1
PIN 5: OUT Diagnostic output
PIN 6: X2 Safety input 2
PIN 7: Y2 Safety output 2
PIN 9: without function

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

Electrical data - Digital Output

Design of control elements: p-type

General data - Features

Actuator monitored: Yes
Short circuit detection: Yes
Cross-circuit detection: Yes
Series-wiring: Yes
Idle assignable pushbutton: Yes
Freely assignable LED: Yes
Safety functions: Yes
Integral system diagnostics, status: Yes
Number of safety contacts: 2

General data

Standards: EN ISO 13849-1 | EN IEC 60947-5-3 | EN IEC 61508
Working principle: Non-contact
Enclosure material: Glass-fibre, reinforced thermoplastic
Gross weight: 513 g
Reaction time, maximum: 60 ms
Duration of risk, maximum: 120 ms

Safety classification

Standards: EN IEC 61508
Performance Level, up to: e
Category: 4
PFH value: 4.00 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in: 3
Mission time: 20 Year(s)

Electrical data - Safety digital outputs

Rated operating current (safety outputs): 250 mA
Design of control elements: p-type
Voltage drop U: 4 V
Leakage current I: 0.5 mA
Voltage, Utilisation category DC-13: 24 VDC
Current, Utilisation category DC-13: 0.25 A

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +70 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +85 °C
Relative humidity, minimum: 30 %
Relative humidity, maximum: 95 %
Note (Relative humidity): non-condensing
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g / 11 ms
Protection class: II

Mechanical data - Connection technique

Termination: Connector M23, 12-pole

Electrical data - Diagnostic outputs

Voltage drop U: 4 V
Voltage, Utilisation category DC-13: 24 VDC
Current, Utilisation category DC-13: 0.05 A

Mechanical data - Switching distances according EN IEC 60947-5-3

Switch distance, typical: 6.5 mm
Assured switching distance "ON" S: 4 mm
Assured switching distance "OFF" S: 30 mm

Mechanical data

Mechanical life, minimum: 1,000,000 Operations
Hysteresis (Switching distance), maximum: 1.5 mm
Repeat accuracy R: 0.5 mm
Latching force: 30 N
Actuating speed, maximum: 0.2 m/s
Tightening torque of the fastening screws for the housing cover, minimum: 0.7 Nm
Tightening torque of the fastening screws for the housing cover, maximum: 1 Nm
Note: Torx T10

Accessory

Recommendation (actuator): AZ/AZM 200-B1

Status indication

Note (LED switching conditions display): Operating condition: LED green | Error / functional defect: LED red | Supply voltage: LED green