103010763
PS116-Z12-ST-R200-1297
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Electrical data
- Required rated short-circuit current
- 400 A
- Utilisation category AC-15
- 240 VAC
- Utilisation category DC-13
- 24 VDC
- Utilisation category DC-13
- 1.5 A
- Switching element
- 1 NO contact, 2 NC contacts
- Switching principle
- Snap action
- Bounce duration, maximum
- 3 ms
- Switching frequency
- 5,000 /h
- Switchover time, maximum
- 5.5 ms
- Material of the contacts, electrical
- Silver
Mechanical data - Dimensions
- Length of sensor
- 16.6 mm
- Width of sensor
- 31 mm
- Height of sensor
- 74.1 mm
- Diameter of Castor
- 9.5 mm
Ambient conditions - Insulation values
- Rated insulation voltage U
- 300 V
- Rated impulse withstand voltage U
- 4 kV
- Degree of pollution
- 3
Safety classification - Safety outputs
- B
- 20,000,000 Operations
- B
- 1,000,000 Operations
- Note (B
- at 10% I | and ohmic load
General data - Features
- Safety functions
- Yes
- Number of auxiliary contacts
- 1
- Number of safety contacts
- 2
General data
- Standards
- EN IEC 60947-5-1
- Terminal (mechanical)
- bottom
- Housing construction form
- Norm construction design
- Actuator type to EN 50047
- c
- Enclosure material
- Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated
- Active area
- Metal film
Safety classification
- Standards
- EN ISO 13849-1
- Mission time
- 20 Year(s)
Ambient conditions
- Degree of protection
- IP67 | IP66
- Ambient temperature
- -30 ... +80 °C
- Protection class
- II
Mechanical data - Connection technique
- Termination
- Connector M12, 6-pole
- Connector position
- Bottom
- Wire cross-section
- 0.5 mm
Mechanical data
- Actuating element
- Roller plunger R200
- Mechanical life, minimum
- 10,000,000 Operations
- Actuating force, minimum
- 10 N
- Positive break force, minimum
- 40 N
- Actuating speed, minimum
- 10 mm/min
- Actuating speed, maximum
- 1 m/s
- Note (Actuating speed)
- Actuating speed with actuating angle 30° to switch axis
- Actuating torque, minimum
- 0.2 Nm
- Positive break torque
- 0.6 Nm
Approvals - Standards
- Certificates
- cURus | CCC