Schmersal
103025861
AZM201B-I1-ST-T-AS-P
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Electrical data
- Time to readiness, maximum
- 4,000 ms
- Switching frequency, maximum
- 1 Hz
Electrical data - AS-Interface specification
- AS-i Specification
- Safety-Slave
- AS-i Version
- V 3.0
- AS-i Profile
- S-7.B.F.E
- AS-i, IO-Code
- 0x7
- AS-i, ID-Code
- 0xB
- AS-i, ID-Code1
- 0xF
- AS-i, ID-Code2
- 0xE
- AS-i Input, Channel 1
- Data bits DI 0 / DI 1 = dynamic code transmission
- AS-i Input, Channel 2
- Data bits DI 2 / DI 3 = dynamic code transmission
- AS-i Outputs, DO 0
- Solenoid control
- AS-i Outputs, DO 1
- No Function
- AS-i Outputs, DO 2
- No Function
- AS-i Outputs, DO 3
- No Function
- AS-i Parameter bits, P0
- Safety guard and actuator detected
- AS-i Parameter bits, P1
- Solenoid interlock locked
- AS-i Parameter bits, P2
- Magnet voltage in tolerance range
- AS-i Parameter bits, P3
- Internal device error (FID)
- Note (AS-i Parameter bits)
- FID: periphery error
- AS-i Input module address
- 0
- Note (AS-i Input module address)
- Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Mechanical data - Dimensions
- Length of sensor
- 50 mm
- Width of sensor
- 40 mm
- Height of sensor
- 220 mm
Pin assignment
- PIN 1
- AS-Interface +
- PIN 2
- Aux - (P)
- PIN 3
- AS-Interface -
- PIN 4
- Aux + (P)
Ambient conditions - Insulation values
- Rated insulation voltage U
- 32 VDC
- Rated impulse withstand voltage U
- 0.8 kV
- Overvoltage category
- III
- Degree of pollution
- 3
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately. | Triangular key for AZM 201
Electrical data - Magnet control
- Magnet switch-on time
- 100 %
General data - Features
- Power to unlock
- Yes
- Actuator monitored
- Yes
- Latching
- Yes
- Manual release
- Yes
- Safety functions
- Yes
- Integral system diagnostics, status
- Yes
- Number of actuating directions
- 2
General data
- Standards
- EN IEC 62026-2 | EN ISO 13849-1 | EN ISO 14119 | EN IEC 60947-5-3 | EN IEC 61508
- Coding
- Individual coding
- Coding level according to EN ISO 14119
- High
- Working principle
- RFID
- Frequency band RFID
- 125 kHz
- Transmitter output RFID, maximum
- -6 dB/m
- Enclosure material
- Glass-fibre, reinforced thermoplastic
- Gross weight
- 541 g
- Reaction time, maximum
- 100 ms
- Duration of risk, maximum
- 200 ms
Safety classification
- Standards
- EN ISO 13849-1 | EN IEC 61508
Electrical data - AS Interface
- Rated operating voltage
- 26.5 ... 31.6 VDC (Protection against polarity reversal)
- AS-i Current consumption, maximum
- 100 mA
Safety classification - Interlocking function
- Performance Level, up to
- e
- Category
- 4
- PFH value
- 1.81 x 10⁻⁹ /h
- PFD value
- 1.59 x 10⁻⁴
- Safety Integrity Level (SIL), suitable for applications in
- 3
- Mission time
- 20 Year(s)
Ambient conditions
- Degree of protection
- IP67 | IP66
- Ambient temperature
- -25 ... +60 °C
- Storage and transport temperature, minimum
- -25 °C
- Storage and transport temperature, maximum
- +85 °C
- Relative humidity, maximum
- 93 %
- Note (Relative humidity)
- non-condensing | non-icing
- Resistance to vibrations
- 10 … 150 Hz, amplitude 0.35 mm
- Restistance to shock
- 30 g / 11 ms
- Protection class
- III
- Permissible installation altitude above sea level, maximum
- 2,000 m
Mechanical data - Connection technique
- Termination
- Connector plug M12, 4-pole, (A-coding)
Mechanical data
- Mechanical life, minimum
- 1,000,000 Operations
- Holding force F
- 2,000 N
- Note (clamping force F
- 1,000 N when used with the AZ/AZM201-B30 actuator, for indoor use.
- Holding force F
- 2,600 N
- Note (clamping force F
- 1,300 N when used with the AZ/AZM201-B30 actuator, for indoor use.
- Latching force
- 30 N
- Actuating speed, maximum
- 0.2 m/s
- Type of the fixing screws
- 2x M6
- Tightening torque of the fixing screws, maximum
- 8 Nm
- Tightening torque of the fastening screws for the housing cover, minimum
- 0.7 Nm
- Tightening torque of the fastening screws for the housing cover, maximum
- 1 Nm
- Note
- Torx T10
Accessory
- Recommendation (actuator)
- AZ/AZM201-B1 | AZ/AZM201-B30
Approvals - Standards
- Certificates
- TÜV | cULus | ASi-SaW | FCC | IC
Electrical data - Auxiliary voltage
- Operating voltage
- 24 VDC -15 % / +10 % (stabilised PELV power supply)
- Current consumption
- 500 mA
- Rated operating voltage
- 24 VDC
Status indication
- Note (LED switching conditions display)
- Status and diagnostics: Transmitter + receiver | (2) LED red: Internal device error | (3) LED yellow: Device condition
Related products
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories