103038399
SSB-RH-NG-2-O-S-V01
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Mechanical data - connector side B
- Connector typ
- Female connector, M12
- Connector coding
- A
- Connector latching
- Screw locking
- Number of pol, side B
- 8
Electrical data
- Current consumption at 24V, minimum
- 11 mA
- Operating current
- 1,500 mA
- Utilisation category DC-12
- 24 VDC
- Utilisation category DC-12
- 0.3 A
- Utilisation category DC-13
- 24 VDC
- Utilisation category DC-13
- 0.3 A
- Switching capacity, maximum
- 7.2 VA
- Switching element
- bistable contact
- Switching principle
- Reed contacts, Non-contact principle
Mechanical data - Dimensions
- Length of sensor
- 125 mm
- Width of sensor
- 110 mm
- Height of sensor
- 24.4 mm
Ambient conditions - Insulation values
- Degree of pollution
- 3
Mechanical data - connector side A
- Connector typ
- Male connector, M12
- Connector coding
- A
- Connector latching
- Screw locking
- Number of pol, side A
- 8
Electrical data - Digital Output
- Output current, maximum
- 300 mA
- Design of control elements
- Reed contacts
- Voltage, Utilisation category DC-12
- 24 VDC
- Current, Utilisation category DC-12
- 1.5 A
- Voltage, Utilisation category DC-13
- 24 VDC
- Current, Utilisation category DC-13
- 1.5 A
General data - Features
- Latching
- Yes
- Wire breakage detection
- Yes
- Suitable for elevators
- Yes
- Number of LEDs
- 7
- Number of snap-in contacts
- 4
- Number of signalling outputs
- 1
General data
- Working principle
- Magnetic drive
- Terminal (mechanical)
- Connector plug M12, 8-pole, A-coded
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +70 °C
- Storage and transport temperature, minimum
- -40 °C
- Storage and transport temperature, maximum
- +85 °C
- Relative humidity, maximum
- 95 %
Mechanical data - Switching distances according EN IEC 60947-5-3
- Switching distance S
- 2 mm
- Switching distance S
- 15 mm
Mechanical data
- Actuating panels
- front side
- Actuating element
- Magnet
- Repeat accuracy R
- 0.3 mm
- Minimum distance devices
- 50 mm
- Actuating speed, maximum
- 9 m/s
- Mounting
- rear with 2 threaded bolts
- Type of the fixing screws
- 2x M4
- Tightening torque of nuts, maximum
- 2 Nm
Accessory
- Recommendation (actuator)
- BP 15 S | BP 15 N
- Recommendation (actuator, lift switchgear)
- BP 15