999999988

RSS260-123456 Test

999999988

999999988

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

Electrical data

Operating voltage: 24 VDC -15 % / +10 %
No-load supply current I: 100 mA
Rated operating voltage: 24 VDC
Operating current: 600 mA
Required rated short-circuit current: 100 A
Time to readiness, maximum: 2,000 ms
Switching frequency, approx.: 1 Hz

Mechanical data - Dimensions

Length of sensor: 29.5 mm
Width of sensor: 39.2 mm
Height of sensor: 18 mm

Pin assignment

PIN 1: A1 U | : White
PIN 2: X1 safety input 1: Brown
PIN 3: A2 GND: Green
PIN 4: Y1 safety output 1: Yellow
PIN 5: OUT Diagnostic output OUT Grey
PIN 6: X2 safety input 2: Pink
PIN 7: Y2 safety output 2: Blue
PIN 8: IN without function: Red

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

General data - Features

Diagnostic output: Yes
Short circuit detection: Yes
Cross-circuit detection: Yes
Safety functions: Yes
Cascadable: Yes
Integral system diagnostics, status: Yes
Number of LEDs: 3
Number of semi-conductor outputs with signaling function: 1
Number of fail-safe digital outputs: 2

General data

Standards: EN IEC 60947-5-3
Coding: Universal coding
Coding level according to EN ISO 14119: Low
Working principle: RFID
Housing construction form: Block
Installation conditions (mechanical): not flush
Sensor topology: Sensor for series wiring
Enclosure material: Plastic, thermoplastic, self-extinguishing
Active area: Glass-fibre, thermoplastic
Gross weight: 47 g
Reaction time, maximum: 100 ms
Duration of risk, maximum: 200 ms

Safety classification

Standards: EN ISO 13849-1 | EN IEC 60947-5-3 | EN IEC 62061 | EN IEC 61508
Performance Level, up to: e
Category: 4
PFH value: 6.80 x 10⁻¹⁰ /h
Safety Integrity Level (SIL), suitable for applications in: 3
Mission time: 20 Year(s)

Electrical data - Safety digital outputs

Design of control elements: p-type
Voltage drop U: 1 V
Leakage current I: 0.5 mA
Voltage, Utilisation category DC-12: 24 VDC
Current, Utilisation category DC-12: 0.25 A
Voltage, Utilisation category DC-13: 24 VDC
Current, Utilisation category DC-13: 0.25 A

Ambient conditions

Degree of protection: IP65 | IP67
Ambient temperature: -25 ... +65 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +85 °C
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g / 11 ms

Mechanical data - Connection technique

Termination: Connector M8
Note (length of the sensor chain): Cable length and cross-section change the voltage drop dependiing on the output current

Electrical data - Diagnostic outputs

Design of control elements: p-type
Voltage drop U: 2 V
Voltage, Utilisation category DC-12: 24 VDC
Current, Utilisation category DC-12: 0.05 A
Voltage, Utilisation category DC-13: 24 VDC
Current, Utilisation category DC-13: 0.05 A

Mechanical data - Switching distances according EN IEC 60947-5-3

Switching distance S: front 12 mm | lateral 9 mm
Assured switching distance "ON", frontal: 10 mm
Assured switching distance "OFF", frontal: 18 mm
Assured switching distance "ON", lateral: 6 mm
Assured switching distance "OFF", lateral: 15 mm

Mechanical data

Actuating panels: lateral | front side
Active area: lateral | front
Hysteresis (Switching distance), maximum: 2 mm
Repeat accuracy R: 0.5 mm
Note (Repeat accuracy R): Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle).Minimum 100 mm clearance in case of approach from side.
Mounting: A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.

Accessory

Recommendation (actuator): RST16-1 | RST-U-2 | RST260-1
Recommended safety switchgear: PROTECT PSC1 | SRB-E-301ST | SRB-E-201LC

Approvals - Standards

Certificates: TÜV | cULus | FCC | IC | UKCA

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiation: IEC 61000-6-4
EMC rating: IEC 60947-3

Status indication

Note (LED switching conditions display): LED yellow: Operating condition | LED green: Supply voltage | LED red: Fault