Schneider Electric
AP8932
APC Rack PDU, 2G, switched, 0U, 30A, 100V to 120V, 24 NEMA 5-20R sockets
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Conformance
- Product Certifications
- cUL Listed || PSE || UL Listed
- Standards
- FCC Part 15 class A || ICES-003 || UL 60950-1
Contractual warranty
- Warranty
- 2 years repair or replace
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP1612035_EN
- Take-Back
- Take-back program available
- Lead Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- Optimized Energy Efficiency
- Energy efficient product
- Eu Rohs Directive
- Compliant with Exemptions
Physical
- Height
- 179.1 cm
- Net Weight
- 7.85 kg
- Mounting Location
- side
- Mounting Mode
- not rack-mountable
- Color
- Black
- Mounting Position
- vertical
- Width
- 5.5 cm
- Depth
- 4.6 cm
Input
- Input Frequency
- 50/60 Hz
- Line Rated Current
- 24 A
Environmental
- Storage Relative Humidity
- 5-95 %
- Ambient Air Temperature For Operation
- -5-60 °C
- Storage Altitude
- 0-50000 ft
- Ambient Air Temperature For Storage
- -25-65 °C
- Relative Humidity
- 5-95 %
- Operating Altitude
- 0...10000 ft
Overview
- Lead Time
- Usually in Stock
- Presentation
- APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Specifications
- Number Of Cables
- 1
- Cable Length
- 9.84 ft
- Main Input Voltage
- 100 V || 120 V
- Number Of Rack Unit
- 0U
- Provided Equipment
- Installation guide || Rack Mounting brackets || Serial configuration cable || Safety guide
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther