ATS22C59S6

Additional Information

Part Number

ATS22C59S6

UNSPSC

39121521

Tariff Code

8504404000

Country of Origin

CN

Environment

Product Certifications

CCC || UL || CSA || GOST || C-tick

Standards

EN/IEC 60947-4-2

Electromagnetic Compatibility

conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || voltage/current impulse level 3 IEC 61000-4-5

Ambient Air Temperature For Operation

-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)

Shock Resistance

15 gn 11 ms EN/IEC 60068-2-27

Vibration Resistance

1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm 2-13 Hz)EN/IEC 60068-2-6

Pollution Degree

level 2 IEC 60664-1

Noise Level

56 dB

Ambient Air Temperature For Storage

-25-70 °C

Relative Humidity

0-95 % without condensation or dripping water EN/IEC 60068-2-3

Operating Altitude

<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Device Connection

in the motor supply line

Network Frequency

45...66 Hz

Minimum Switching Current

100 mA 12 V DC relay outputs)

[Uc] Control Circuit Voltage

230 V - 15...10 % 50/60 Hz

Height

455 mm

Discrete Output Type

relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Maximum Switching Current

5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs

Discrete Input Voltage

24 V <= 30 V

Marking

CE

Power Range

110-220 kW 200-240 V 3 phase || 250-500 kW 480-500 V 3 phase || 250-500 kW 380-440 V 3 phase

Net Weight

50 kg

Output Current

0.4...1 Icl adjustable

Installed Device

31

Connector Type

1 RJ45

Motor Starter Type

soft starter

Communication Data Link

serial

Function Available

internal bypass

Discrete Output Number

2

Control Circuit Consumption

20 W

Communication Port Protocol

Modbus

Supply Voltage Limits

195-660 V

Discrete Input Type

LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

Physical Interface

RS485 multidrop

Type Of Cooling

forced convection

Discrete Input Number

3

Assembly Style

with heat sink

Operating Position

vertical +/- 10 degree

Ptc Probe Input

750 Ohm

Width

304 mm

Transmission Rate

4800, 9600 or 19200 bps

Depth

339.7 mm

Discrete Input Logic

positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA

Protection Type

phase failure line || thermal protection motor || thermal protection starter

Supply Frequency

50...60 Hz - 10...10 %

Specifications

Product Destination

asynchronous motors

[Us] Rated Supply Voltage

230...600 V - 15...10 %

Range Of Product

Altistart 22

Product Or Component Type

soft starter

Component Name

ATS22

Phase

3 phase

Power Dissipation In W

251 W for standard applications

Icl Starter Rating

590 A connection in the motor supply line for standard applications

Type Of Start

start with torque control (current limited to 3.5 In)

Utilisation Category

AC-53A

Product Specific Application

pumps and fans

Ip Degree Of Protection

IP00

Factory Setting Current

477 A

Motor Power Kw

160 kW 230 V || 315 kW 400 V || 355 kW 440 V || 400 kW 500 V

Documents

CAD Models

Trace parts

Download