Schneider Electric
FSG9NE
pressure switch FSG 4.6 bar - adjustable scale 2 thresholds - 2NC
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
Send request for price
Additional Information
- Part Number
- FSG9NE
- UNSPSC
- 39122210
- Country of Origin
- MX
Specifications
- Contacts Type And Composition
- 2 NC snap action
- Pressure Sensor Type
- electromechanical pressure sensor
- Short-Circuit Protection
- 20 A cartridge fuse gG
- Range Of Product
- Telemecanique Pressure sensors XM
- Line Rated Current
- 10 A 250 V AC EN 60730-1
- Pressure Switch Type Of Operation
- regulation between 2 thresholds
- Cable Entry
- 2 entries incorporating Pg 13.5 plastic cable gland 9-13 mm NF C 68-300
- Local Display
- without
- Pressure Sensor Name
- FSG
- Fluid Connection Type
- R 1/4 (male) ISO 7
- Electrical Connection
- screw-clamp terminals 1 x 1...2 x 2 mm²
- Pressure Sensor Size
- 4.6 bar
- Controlled Fluid
- fresh water 0-70 °C) || sea water 0-70 °C)
- Setting
- internal
- Scale Type
- adjustable differential
- Electrical Circuit Type
- power circuit
Contractual warranty
- Warranty
- 18 months
Complementary
- Repeat Accuracy
- 2 %
- Pressure Actuator
- diaphragm
- Height
- 123 mm
- Terminal Block Type
- 4 terminals
- Terminals Description Iso N°1
- (1-2)NC || (3-4)NC
- Possible Differential Minimum At Low Setting
- 1 bar
- Possible Differential Minimum At Middle Setting
- 1.1 bar
- Possible Differential Maximum At Low Setting
- 2.1 bar
- Maximum Operating Rate
- 10 cyc/mn
- Adjustable Range Of Switching Point On Falling Pressure
- 0.3-3.4 bar
- Materials In Contact With Fluid
- nylon 6/6 || nitrile || zinc plated steel
- Motor Power Kw
- 0.75 kW/1 hp at 110 V AC, 1 phase || 1.1 kW/1.5 hp at 110 V AC, 3 phase || 1.5 kW/2 hp at 230 V AC, 1 phase || 1.5 kW/2 hp at 400 V AC, 1 phase || 2.2 kW/3 hp at 230 V AC, 3 phase || 2.2 kW/3 hp at 400 V AC, 3 phase
- Net Weight
- 0.34 kg
- [Uimp] Rated Impulse Withstand Voltage
- 6 kV EN/IEC 60947-1
- Electrical Durability
- 100000 cycles 10 cyc/mn
- Maximum Permissible Pressure - Per Cycle
- 5.75 bar
- [Ui] Rated Insulation Voltage
- 500 V EN/IEC 60947-1
- Possible Differential Maximum At Middle Setting
- 2.2 bar
- Mechanical Durability
- 1000000 cycles
- Operating Position
- any position
- Enclosure Material
- PS
- Adjustable Range Of Switching Point On Rising Pressure
- 1.4-4.6 bar
- Possible Differential Minimum At High Setting
- 1.2 bar
- Width
- 72 mm
- Maximum Permissible Accidental Pressure
- 8 bar
- Depth
- 106 mm
- Possible Differential Maximum At High Setting
- 2.3 bar
- Destruction Pressure
- 20 bar
Offer Sustainability
- Environmental Disclosure
- ENVPEP111211EN
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Circularity Profile
- ENVEOLI111210EN
- Eu Rohs Directive
- Not applicable, out of EU RoHS legal scope
Environment
- Ambient Air Temperature For Operation
- 0-45 °C
- Standards
- CE || EN/IEC 60730
- Ip Degree Of Protection
- IP65 conforming to EN/IEC 60529
- Ambient Air Temperature For Storage
- -30-80 °C
- Electrical Shock Protection Class
- class I IEC 536
- Protective Treatment
- TC
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther