LC1D65N7

Environment

Product Certifications

GOST || CSA || DNV || UL || CCC || LROS (Lloyds register of shipping) || BV || RINA || UKCA

Height

122 mm

Standards

IEC 60947-5-1 || EN 60947-4-1 || IEC 60947-4-1 || UL 508 || CSA C22.2 No 14

Climatic Withstand

IACS E10 exposure to damp heat

Net Weight

2.185 kg

Flame Retardance

V1 conforming to UL 94

Protective Treatment

TH 3)IEC 60068-2-30

Ip Degree Of Protection

IP2X VDE 0106 || IP2X IEC 60529

Mechanical Robustness

shocks contactor closed 15 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor opened 10 Gn for 11 ms)

Operating Altitude

0...9842.52 ft (0...3000 m)

Quantity Per Set

set of 10

Fire Resistance

850 °C IEC 60695-2-1

Width

70 mm

Depth

118 mm

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP110205EN

Sustainable Offer Status

Green Premium product

Pvc Free

Yes

Toxic Heavy Metal Free

Yes

Reach Regulation

Free of Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Reach Free Of Svhc

Yes

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

Pro-active China RoHS declaration (out of China RoHS legal scope)

Circularity Profile

N/A

Eu Rohs Directive

Compliant

Complementary

Non-Overlap Time

1.5 ms on energisation between NC and NO contacts || 1.5 ms on de-energisation between NC and NO contacts

Minimum Switching Current

5 mA for control circuit

Power Dissipation Per Pole

6.4 W AC-1 || 4.2 W AC-3e || 6.3 W AC-3 || 9.6 W AC-1

Average Impedance

1.5 Ohm - Ith 80 A 50 Hz for power circuit

Auxiliary Contact Composition

1 NO + 1 NC

Terminals Description Iso N°1

(13-14)NO || (21-22)NC

[Ith] Conventional Free Air Thermal Current

80 A (at 60 °C) for power circuit || 10 A (at 60 °C) for control circuit

Control Circuit Voltage Limits

0.8...1.1 Uc -40-60 °C operational AC 50 Hz || 0.85...1.1 Uc -40-60 °C operational AC 60 Hz || 1...1.1 Uc 60-70 °C operational AC 50/60 Hz || 0.3...0.6 Uc -40-70 °C drop-out AC 50/60 Hz

Mounting Support

rail

Control Circuit Type

AC 50/60 Hz

Safety Reliability Level

B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Insulation Resistance

> 10 MOhm for control circuit

Rated Breaking Capacity

1000 kA at 440 V for power circuit conforming to IEC 60947

Irms Rated Making Capacity

140 A at 440 V AC for control circuit conforming to IEC 60947-5-1 || 140 A AC for control circuit conforming to IEC 60947-5-1 || 1000 A at 440 V for power circuit conforming to IEC 60947

Associated Fuse Rating

125 A gG at <= 690 V coordination type 1 for power circuit || 125 A gG at <= 690 V coordination type 2 for power circuit conforming to IEC 60947-5-1 || 10 A gG for control circuit conforming to IEC 60947-5-1

Inrush Power In Va

160-160 VA cos phi 0.75 (at 20 °C) || 140-140 VA cos phi 0.75 (at 20 °C)

[Uimp] Rated Impulse Withstand Voltage

6 kV IEC 60947

Pole Contact Composition

3 NO

Connections - Terminals

control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid without cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: rigid || power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: rigid without cable end || power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible without cable end || power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: flexible without cable end || power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible with cable end || power circuit: screw terminals 2 2.5-10 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: rigid

Coil Technology

without built-in

Operating Time

12...26 ms closing || 4...19 ms opening

Minimum Switching Voltage

17 V for control circuit

Maximum Operating Rate

3600 cyc/mn 60 °C

Tightening Torque

control circuit 1.7 N.m screw clamp terminal Philips No 2 || power circuit 5 N.m screw terminal flat Ø 6 to Ø 8 mm || control circuit 1.7 N.m screw clamp terminal pozidriv No 2 || control circuit 1.7 N.m screw clamp terminal flat Ø 6 mm

Mechanical Durability

6000000 cycles

Auxiliary Contacts Type

mirror contact 1 NC IEC 60947-4-1 || mechanically linked 1 NO + 1 NC IEC 60947-5-1

Compatibility Code

LC1D

Hold-In Power Consumption In Va

15-15 VA 50 Hz cos phi 0.3 (at 20 °C) || 13-13 VA 60 Hz cos phi 0.3 (at 20 °C)

Overvoltage Category

III

Maximum Horse Power Rating

10 hp at 230/240 V AC 60 Hz for 1 phase motors || 20 hp at 200/208 V AC 60 Hz for 3 phase motors || 20 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 50 hp at 575/600 V AC 60 Hz for 3 phase motors || 5 hp at 115 V AC 60 Hz for 1 phase motors

Motor Power Kw

11 kW at 400 V AC 50 Hz (AC-4) || 30 kW at 380...400 V AC 50 Hz (AC-3) || 37 kW at 500 V AC 50 Hz (AC-3) || 37 kW at 660...690 V AC 50 Hz (AC-3) || 18.5 kW at 220...230 V AC 50 Hz (AC-3) || 30 kW at 415 V AC 50 Hz (AC-3) || 37 kW at 1000 V AC 50 Hz (AC-3) || 30 kW at 440 V AC 50 Hz (AC-3e) || 30 kW at 380...400 V AC 50 Hz (AC-3e) || 37 kW at 500 V AC 50 Hz (AC-3e) || 37 kW at 660...690 V AC 50 Hz (AC-3e) || 18.5 kW at 220...230 V AC 50 Hz (AC-3e) || 30 kW at 415 V AC 50 Hz (AC-3e) || 37 kW at 1000 V AC 50 Hz (AC-3e) || 37 kW at 500 V AC 50 Hz || 30 kW at 380...400 V AC 50 Hz

[Ui] Rated Insulation Voltage

control circuit 600 V UL || power circuit 600 V CSA || power circuit 600 V UL IEC 60947-1 || control circuit 690 V IEC 60947-1 || power circuit 690 V CSA IEC 60947-1 || control circuit 600 V CSA

[Icw] Rated Short-Time Withstand Current

520 A 40 °C - 10 s for power circuit || 900 A 40 °C - 1 s for power circuit

Heat Dissipation

4-5 W at 50/60 Hz for control circuit

Protective Cover

with

Specifications

[Uc] Control Circuit Voltage

415 V AC 50/60 Hz

[Ue] Rated Operational Voltage

power circuit <= 690 V AC 25...400 Hz

Range Of Product

TeSys Deca

Contactor Application

resistive load || motor control

Product Or Component Type

contactor

Range

TeSys

Utilisation Category

AC-1 || AC-2 || AC-3 || AC-3e

[Ie] Rated Operational Current

65 A (at <60 °C) at <= 440 V AC AC-3 for power circuit || 65 A (at <60 °C) at <= 440 V AC AC-3e for power circuit || 65 A (at <60 °C) at 415 V AC AC-3 for power circuit || 80 A (at <60 °C) at 415 V AC AC-1 for power circuit

Poles Description

3P

Device Short Name

LC1D

Documents