LR9D08KITD09BD

Specifications

Product Certifications

LROS (Lloyds register of shipping) || CSA || UL || GOST || DNV || CCC || GL || BV || RINA

[Uc] Control Circuit Voltage

24 V DC

[Ue] Rated Operational Voltage

power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC

Power Dissipation Per Pole

1.56 W AC-1 || 0.2 W AC-3

Average Impedance

2.5 mOhm - Ith 25 A 50 Hz for power circuit

Auxiliary Contact Composition

1 NO + 1 NC

[Ith] Conventional Free Air Thermal Current

25 A (at 60 °C) for power circuit || 10 A (at 60 °C) for signalling circuit

Phase Failure Sensitivity

phase difference > 40% 3-3 s IEC 60947-4-1

Mounting Support

plate || rail

Control Circuit Type

DC standard

Standards

CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508

Safety Reliability Level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Contactor Application

motor control || resistive load

Relay Application

motor protection

Rated Breaking Capacity

250 A at 440 V for power circuit conforming to IEC 60947

Product Or Component Type

motor starter

Irms Rated Making Capacity

250 A at 440 V for power circuit conforming to IEC 60947 || 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1

Associated Fuse Rating

10 A gG for signalling circuit conforming to IEC 60947-5-1 || 25 A gG at <= 690 V coordination type 1 for power circuit || 20 A gG at <= 690 V coordination type 2 for power circuit

[Uimp] Rated Impulse Withstand Voltage

6 kV IEC 60947

Connections - Terminals

power circuit screw clamp terminals 1 1-4 mm²flexible without cable end || power circuit screw clamp terminals 2 1-4 mm²flexible without cable end || power circuit screw clamp terminals 1 1-4 mm²flexible with cable end || power circuit screw clamp terminals 2 1-2.5 mm²flexible with cable end || power circuit screw clamp terminals 1 1-4 mm²solid without cable end || power circuit screw clamp terminals 2 1-4 mm²solid without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible without cable end || control circuit screw clamp terminals 2 1-4 mm²flexible without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit screw clamp terminals 2 1-2.5 mm²flexible with cable end || control circuit screw clamp terminals 1 1-4 mm²solid without cable end || control circuit screw clamp terminals 2 1-4 mm²solid without cable end

Range

TeSys

Pole Contact Composition

3 NO

Utilisation Category

AC-4 || AC-1 || AC-3

Maximum Operating Rate

3600 cyc/h 60 °C

Tightening Torque

power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2

Mechanical Durability

30 Mcycles

Poles Description

3P

Operating Time

53.55...72.45 ms closing || 16...24 ms opening

Overvoltage Category

III

Motor Power Kw

2.2 kW at 220...230 V AC 50/60 Hz (AC-3) || 4 kW at 380...400 V AC 50/60 Hz (AC-3) || 4 kW at 415...440 V AC 50/60 Hz (AC-3) || 5.5 kW at 500 V AC 50/60 Hz (AC-3) || 5.5 kW at 660...690 V AC 50/60 Hz (AC-3) || 2.2 kW at 400 V AC 50/60 Hz (AC-4)

Maximum Horse Power Rating

1 hp at 230/240 V AC 50/60 Hz for 1 phase motors || 2 hp at 200/208 V AC 50/60 Hz for 3 phase motors || 2 hp at 230/240 V AC 50/60 Hz for 3 phase motors || 5 hp at 460/480 V AC 50/60 Hz for 3 phase motors || 7.5 hp at 575/600 V AC 50/60 Hz for 3 phase motors || 0.33 hp at 115 V AC 50/60 Hz for 1 phase motors

[Ui] Rated Insulation Voltage

power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1 || signalling circuit 600 V CSA || signalling circuit 600 V UL

Protective Cover

with

Environment

Mechanical Robustness

vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor open10 Gn for 11 ms || shocks contactor closed15 Gn for 11 ms

Ambient Air Temperature For Operation

-5-60 °C

Height

77 mm

Standards

UL 60947-4-1 || IEC 60947-4-1 || GB 14048.4 || CSA C22.2

Ambient Air Temperature For Operation

-25-70 °C IEC 60255-8

Pollution Degree

3

Product Certifications

TÜV || CSA || cULus || CCC

Electromagnetic Compatibility

surge withstand 2 kV common mode IEC 61000-4-5 || resistance to electrostatic discharge 8 kV IEC 61000-4-2 || immunity to radiated radio-electrical interference 10 V/m IEC 61000-4-3 || immunity to fast transients 2 kV IEC 61000-4-4

Dielectric Strength

6 kV 50 Hz IEC 60255-5

Net Weight

0.48 kg

Depth

79.9 mm

Flame Retardance

V1 conforming to UL 94

Ambient Air Temperature For Storage

-60-80 °C

Width

45 mm

Height

72.5 mm

Protective Treatment

TH IEC 60068-2-30

Net Weight

0.18 kg

Ip Degree Of Protection

IP20 front face IEC 60529

Operating Altitude

6561.68 ft (2000 m) without derating

Operating Altitude

9842.52 ft (3000 m) without derating

Fire Resistance

850 °C IEC 60695-2-1

Depth

95 mm

Permissible Ambient Air Temperature Around The Device

-40-70 °C at Uc

Complementary

Time Range

1.5...4 min - automatic reset time

Non-Overlap Time

1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact

Minimum Switching Current

5 mA for signalling circuit

[Ith] Conventional Free Air Thermal Current

5 A signalling circuit

Tightening Torque

control circuit 0.8 N.m screw clamp terminals || power circuit 3.1 N.m screw clamp terminals

Control Circuit Voltage Limits

drop-out 0.1...0.25 Uc DC 60 °C) || operational 0.7...1.25 Uc DC 60 °C)

[Ue] Rated Operational Voltage

690 V power circuit || 660 V signalling circuit

Contact Compatibility

M4

Thermal Protection Adjustment Range

0.4-2 A

Power Consumption In W

300 mW

Contactor Coil Voltage

24 V DC standard

Hold-In Power Consumption In W

5.4-5.4 W 20 °C

Insulation Resistance

> 10 MOhm for signalling circuit

Ip Degree Of Protection

front face IP20 IEC 60529 || front face IP20 VDE 0106

Thermal Overload Class

class 5…30

Associated Fuse Rating

5 A gG signalling circuit || 5 A BS signalling circuit

Power Range

1.1-2 kW 200-240 V 3 phase || 2.2-3 kW 380-440 V 3 phase || 4-6 kW 380-440 V 3 phase || 4-6 kW 480-500 V 3 phase

[Uimp] Rated Impulse Withstand Voltage

6 kV

Connections - Terminals

control circuit screw clamp terminals 1 2.5-2.5 mm² solid or flexible - without cable end || power circuit screw clamp terminals 1 16-16 mm² solid or flexible - without cable end

Coil Technology

built-in bidirectional peak limiting diode suppressor

Time Constant

28 ms

[Ui] Rated Insulation Voltage

power circuit 1000 V || signalling circuit 690 V

Motor Starter Type

direct on-line contactor

Minimum Switching Voltage

17 V for signalling circuit

Tripping Threshold

1.25 In IEC 60947-4-1

Signalling Circuit Frequency

25...400 Hz

Control Type

Red push-button stop and manual reset || White 2 microswitches adjustable trip class || Red knob automatic reset || White dial full-load current adjustment

Mounting Support

under contactor || plate, with specific accessories || rail, with specific accessories

Inrush Power In W

5.4-5.4 W 20 °C)

Auxiliary Contacts Type

mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1

Mechanical Robustness

vibrations 10...150 Hz 6 Gn) IEC 60068-2-6 || shocks 11 ms 15 gn) IEC 60068-2-7

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1502001EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

Product out of China RoHS scope. Substance declaration for your information.

Circularity Profile

ENVEOLI1502001EN

Eu Rohs Directive

Compliant with Exemptions

Documents