LX1G3SLSEN

Specifications

[Uc] Control Circuit Voltage

200...500 V AC/DC 50/60 Hz

Range Compatibility

TeSys G LX1G contactor coil

Product Or Component Type

contactor coil

Range

TeSys

Maximum Operating Rate

600 cyc/mn 60 °C

Poles Description

3P

Operating Time

20...35 ms opening || 40...55 ms closing

Product Compatibility

LC1G400...500

Device Short Name

LX1G

Mechanical Durability

5 Mcycles

Environment

Ambient Air Temperature For Operation

-25-60 °C

Height

167.0 mm

Standards

EN/IEC 60947-4-1 || UL 60947-4-1A || CSA C22.2 No 60947-4-1

Electromagnetic Compatibility

EMC immunity conforming to IEC 60947-4-1 || emission tests criteria A conforming to IEC 60947-4-1 || immunity to radiated radio-electrical interference - test level: 20 V/m conforming to EN/IEC 61000-4-3 || voltage dips and interruptions immunity test conforming to SEMI F47

Ip Degree Of Protection

IP20 IEC 60529

Pollution Degree

3 IEC 60947-1

Ambient Air Temperature For Storage

-60-80 °C

Operating Altitude

9842.52 ft (3000 m) without derating || 5000 m with derating factor

Quantity Per Set

1

Width

140.0 mm

Depth

93.0 mm

Permissible Ambient Air Temperature Around The Device

-40-70 °C at Uc

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP2105013

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

China Rohs Regulation

X

Circularity Profile

ENVEOLI2105013

Eu Rohs Directive

Compliant with Exemptions

Complementary

Control Circuit Voltage Limits

operational 0.8...1.1 Uc 60 °C) || drop-out 0...0.45 Uc 60 °C)

Hold-In Power Consumption In W

8.6-8.6 W

Inrush Power In Va

535-535 VA

Connections - Terminals

control circuit push-in termination 1 0.2-2.5 mm² solid stranded without cable end sleeve AWG 26...AWG 12 || control circuit push-in termination 1 0.25-2.5 mm² flexible with cable end sleeve AWG 24...AWG 14 || control circuit push-in termination 2 0.5-1.0 mm² rigid or stranded with cable end sleeve AWG 20...AWG 18

Coil Technology

built-in bidirectional peak limiting

Hold-In Power Consumption In Va

15.4-15.4 VA

Inrush Power In W

300 W

Documents