Schneider Electric
STBACI1400K
standard analog input kit, Modicon STB, 4 to 20mA, 8I, 15 bits with sign
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
$357.86
1
Payment methods:
A total of 83 Parts In-Stock from 28 Distributors
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
€252.95
Additional Information
- Part Number
- STBACI1400K
- UNSPSC
- 32151603
- Tariff Code
- 8538908180
- Country of Origin
- ID
Environment
- Product Certifications
- FM Class 1 Division 2 || CSA || UL || ATEX Cat 3G || C-tick
- Ambient Air Temperature For Storage
- -40...185 °F without derating
- Ambient Air Temperature For Operation
- -25-70 °C
- Shock Resistance
- 30 gn 11 ms IEC 88 reference 2-27
- Vibration Resistance
- +/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
- Ip Degree Of Protection
- IP20 conforming to IEC 61131-2 class 1
- Pollution Degree
- 2 IEC 60664-1
- Ambient Air Temperature For Storage
- -40-85 °C without derating
- Relative Humidity
- 95-95 % 60-60 °C without condensation
- Operating Altitude
- <= 6561.68 ft (2000 m)
- Ambient Air Temperature For Operation
- 13...158 °F
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Insulation Between Channels And Logic Bus
- 1500 V for 1 minute
- Cold Swapping
- yes
- Maximum Supply Current For Sensors
- 100 mA per input channels
- Input Impedance
- <= 250 Ohm
- Height
- 18.4 mm
- Insulation Between Channels And Sensor Bus
- 30 V
- Status Led
- 1 LED (Green) module status (RDY)
- Hot Swapping Fallback
- yes for standard NIMs
- Differential Linearity
- monotonic
- Integral Linearity
- +/- 0.08 %FS
- Supply
- power distribution module
- Data Format
- EN 61131-2 || IEC 61131-2
- Current Consumption
- 90 mA 5 V DC logic bus
- Marking
- CE
- Fallback Status
- state 0 basic NIMs || user configurable standard NIMs
- Temperature Drift
- +/-0.005 %/°C
- Addressing Requirement
- 16 input words
- Absolute Accuracy Error
- +/- 0.4 % of full scale per °C
- Absolute Maximum Input
- 25 mA/50 V DC
- Update Time
- 22 ms
- Width
- 128.3 mm
- Overvoltage Category
- II
- Depth
- 70 mm
- Product Compatibility
- power distribution module STBPDT3100/3105 || mounting base STBXBA2000
- [Us] Rated Supply Voltage
- 24 V DC
Specifications
- Range Of Product
- Modicon STB distributed I/O solution
- Type Of Filter
- single low pass input filter 985 Hz
- Product Or Component Type
- standard analog input kit
- Analogue Input Number
- 8
- Analogue Input Resolution
- 15 bits + sign
- Kit Composition
- STBXTS1100, 6-terminal screw type connector || STBXTS2100, 6-terminal spring clamp connector || STBACI1400 module || STBXBA2000 base
- Analogue Input Type
- current 0...20 mA || current 4...20 mA
