STBART0200K

Additional Information

Part Number

STBART0200K

UNSPSC

32151601

Tariff Code

8537109170

Country of Origin

FR

Environment

Product Certifications

UL || FM Class 1 Division 2 || CSA || ATEX Cat 3G || C-tick

Ambient Air Temperature For Storage

-40...185 °F without derating

Ambient Air Temperature For Operation

0-70 °C

Shock Resistance

30 gn 11 ms IEC 88 reference 2-27

Vibration Resistance

+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail

Ip Degree Of Protection

IP20 conforming to IEC 61131-2 class 1

Pollution Degree

2 IEC 60664-1

Ambient Air Temperature For Storage

-40-85 °C without derating

Relative Humidity

95-95 % 60-60 °C without condensation

Operating Altitude

<= 6561.68 ft (2000 m)

Ambient Air Temperature For Operation

32...140 °F without derating

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Insulation Between Channels And Logic Bus

1500 V for 1 minute

Cold Swapping

yes

Maximum Supply Current For Sensors

100 mA per input channels

Input Impedance

10 MOhm +/- 80 mV

Status Led

1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)

Hot Swapping Fallback

yes for standard NIMs

Supply

power distribution module

Data Format

EN 61131-2 || IEC 61131-2

Current Consumption

30 mA 5 V DC logic bus

Marking

CE

Fallback Status

state 0 basic NIMs || user configurable standard NIMs

Conversion Time

150 ms voltage 60 Hz || 170 ms voltage 50 Hz || 180 ms temperature probe 60 Hz 2 or 4 wires || 200 ms temperature probe 50 Hz 2 or 4 wires || 210 ms thermocouple with internal cold-junction compensation 60 Hz || 230 ms thermocouple with internal cold-junction compensation 50 Hz || 300 ms temperature probe 60 Hz 3 wires || 340 ms temperature probe 50 Hz 3 wires || 360 ms thermocouple with external cold-junction compensation 60 Hz || 400 ms thermocouple with external cold-junction compensation 50 Hz

Addressing Requirement

1 word for cold-junction compensation || 2 input words

Absolute Accuracy Error

+/- 0.1 % of full scale 25 °C internal || +/- 0.15 % of full scale 25 °C external

Maximum Wiring Resistance

20 Ohm Cu 10 IEC/US/JIS 2 or 3 wires || 20 Ohm Ni 100 IEC/US/JIS 2 or 3 wires || 20 Ohm Pt 100 IEC/US/JIS 2 or 3 wires || 200 Ohm Ni 1000 IEC/US/JIS 2 or 3 wires || 200 Ohm Pt 1000 IEC/US/JIS 2 or 3 wires || 50 Ohm Cu 10 IEC/US/JIS 4 wires || 50 Ohm Ni 100 IEC/US/JIS 4 wires || 50 Ohm Pt 100 IEC/US/JIS 4 wires || 500 Ohm Ni 1000 IEC/US/JIS 4 wires || 500 Ohm Pt 1000 IEC/US/JIS 4 wires

Absolute Maximum Input

+/- 7.5 V DC

Protection Type

short-circuit protection

Overvoltage Category

II

Product Compatibility

mounting base STBXBA1000 || power distribution module STBPDT3100/3105

[Us] Rated Supply Voltage

24 V DC

Measurement Accuracy

+/- 1 °C Ni 100 25 °C external || +/- 1 °C Ni 100 25 °C internal || +/- 1 °C Ni 1000 25 °C external || +/- 1 °C Ni 1000 25 °C internal || +/- 1 °C Pt 100 25 °C internal || +/- 1 °C Pt 1000 25 °C internal || +/- 1.75 °C thermocouple B with external cold-junction compensation 25 °C || +/- 1.75 °C thermocouple E with external cold-junction compensation 25 °C || +/- 1.75 °C thermocouple J with external cold-junction compensation 25 °C || +/- 1.75 °C thermocouple K with external cold-junction compensation 25 °C || +/- 1.75 °C thermocouple R with external cold-junction compensation 25 °C || +/- 1.75 °C thermocouple S with external cold-junction compensation 25 °C || +/- 1.75 °C thermocouple T with external cold-junction compensation 25 °C || +/- 2 °C Pt 100 25 °C external || +/- 2 °C Pt 1000 25 °C external || +/- 2.85 °C thermocouple B with external cold-junction compensation 60 °C || +/- 2.85 °C thermocouple E with external cold-junction compensation 60 °C || +/- 2.85 °C thermocouple J with external cold-junction compensation 60 °C || +/- 2.85 °C thermocouple K with external cold-junction compensation 60 °C || +/- 2.85 °C thermocouple R with external cold-junction compensation 60 °C || +/- 2.85 °C thermocouple S with external cold-junction compensation 60 °C || +/- 2.85 °C thermocouple T with external cold-junction compensation 60 °C || +/- 3.6 °C thermocouple R with internal cold-junction compensation 25 °C || +/- 4 °C Cu 10 25 °C external || +/- 4 °C Cu 10 25 °C internal || +/- 4 °C thermocouple K with internal cold-junction compensation 25 °C || +/- 4.1 °C thermocouple S with internal cold-junction compensation 25 °C || +/- 4.2 °C thermocouple R with internal cold-junction compensation 60 °C || +/- 4.4 °C thermocouple T with internal cold-junction compensation 25 °C || +/- 4.6 °C thermocouple B with internal cold-junction compensation 25 °C || +/- 4.6 °C thermocouple E with internal cold-junction compensation 25 °C || +/- 5 °C thermocouple S with internal cold-junction compensation 60 °C || +/- 5.1 °C thermocouple J with internal cold-junction compensation 25 °C || +/- 5.5 °C thermocouple K with internal cold-junction compensation 60 °C || +/- 6.4 °C thermocouple T with internal cold-junction compensation 60 °C || +/- 6.8 °C thermocouple B with internal cold-junction compensation 60 °C || +/- 6.8 °C thermocouple E with internal cold-junction compensation 60 °C || +/- 7 °C thermocouple J with internal cold-junction compensation 60 °C

Measurement Resolution

0.01 mV voltage || 0.1 °C or 0.1 °F temperature probe || 0.1 °C or 0.1 °F thermocouple

Specifications

Range Of Product

Modicon STB distributed I/O solution

Type Of Filter

single low pass input filter 25 Hz

Product Or Component Type

standard analog input kit

Analogue Input Number

2

Analogue Input Resolution

15 bits + sign

Kit Composition

STBART0200 module || STBXTS1100, 6-terminal screw type connector || STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector

Analogue Input Type

voltage +/- 80 mV || temperature probe -100...+260 °C Cu 10 2, 3 or 4 wires IEC || temperature probe -100...+450 °C Pt 100 2, 3 or 4 wires US/JIS || temperature probe -100...+450 °C Pt 1000 2, 3 or 4 wires US/JIS || temperature probe -200...+850 °C Pt 100 2, 3 or 4 wires IEC || temperature probe -200...+850 °C Pt 1000 2, 3 or 4 wires IEC || temperature probe -60...+180 °C Ni 100 2, 3 or 4 wires IEC || temperature probe -60...+180 °C Ni 1000 2, 3 or 4 wires IEC || thermocouple +130...+1820 °C thermocouple B || thermocouple -200...+760 °C thermocouple J || thermocouple -270...+1000 °C thermocouple E || thermocouple -270...+1370 °C thermocouple K || thermocouple -270...+400 °C thermocouple T || thermocouple -50...+1665 °C thermocouple R || thermocouple -50...+1665 °C thermocouple S

Documents

CAD Models

Trace parts

Download