APS1250

Overview

UPC Code

037332121653

Output

Frequency Compatibility

60 Hz

Pure Sine Wave Output

No

Output (Watts)

1250

Nominal Output Voltage(s) Supported

120V

Output Receptacles

(2) 5-15R

Continuous Output Capacity (Watts)

1250

Peak Output Capacity (Watts)

2500

Output Voltage Regulation

LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).

Output Frequency Regulation

60 Hz (+/- 0.3 Hz)

Overload Protection

Includes 8A input breaker dedicated to the charging system and 12A output breaker for AC output loads

Input

Nominal Input Voltage(s) Supported

120V AC

Recommended Electrical Service

DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT: 120VAC

Maximum Input Amps / Watts

DC INPUT: Full continuous load - 127A at 12V DC. AC INPUT: 12 amps at 120VAC with full inverter and charger load (6.3A max charger-only)

Input Connection Type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug

Voltage Compatibility (VAC)

120

Voltage Compatibility (VDC)

12

Battery

Expandable Battery Runtime

Runtime is expandable with any number of user supplied wet, gel or SLA batteries

DC System Voltage (VDC)

12

Battery Pack Accessory (Optional)

98-121 sealed lead acid battery (optional)

Battery Charge

30A max, 3 step, float for long term maintenance

Expandable Runtime

Yes

User Interface, Alerts & Controls

Front Panel LEDs

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

Switches

3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.

Surge / Noise Suppression

AC Suppression Joule Rating

450

Physical

Cooling Method

Multi-speed fan

Form Factors Supported

Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

Material of Construction

Polycarbonate

Receptacle Color

Black

Shipping Dimensions (hwd / in.)

12.60 x 10.60 x 10.20

Shipping Weight (lbs.)

24.30

Unit Dimensions (hwd / in.)

7 x 8.75 x 9

Unit Weight (lbs.)

23.2

Environmental

Relative Humidity

0-95% non-condensing

Line / Battery Transfer

Transfer Time (Line Power to Battery Mode)

16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)

Low Voltage Transfer to Battery Power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)

High Voltage Transfer to Battery Power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)

Warranty

Product Warranty Period (U.S. & Canada)

1-year limited warranty

Documents