APSX750

Overview

UPC Code

037332121622

Output

Frequency Compatibility

50 Hz

Pure Sine Wave Output

No

Output (Watts)

750

Nominal Output Voltage(s) Supported

230V

Output Receptacles

(2) Universal outlets

Continuous Output Capacity (Watts)

750

Peak Output Capacity (Watts)

1500

Output Voltage Regulation

LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).

Output Frequency Regulation

50 Hz (+/- 0.3 Hz)

Overload Protection

Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads

Input

Nominal Input Voltage(s) Supported

230V AC

Recommended Electrical Service

DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 100A minimum battery system fusing is recommended. AC INPUT: 230VAC

Maximum Input Amps / Watts

DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)

Input Connection Type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection

Voltage Compatibility (VAC)

230

Voltage Compatibility (VDC)

12

Battery

Expandable Battery Runtime

Runtime is expandable with any number of user supplied wet or gel type batteries

DC System Voltage (VDC)

12

Battery Pack Accessory (Optional)

98-121 sealed lead acid battery (optional)

Battery Charge

Selectable 5 / 20 amp with 1/2 cycle (10 ms) transfer time

Expandable Runtime

Yes

User Interface, Alerts & Controls

Front Panel LEDs

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

Switches

3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.

Surge / Noise Suppression

AC Suppression Joule Rating

1020

Physical

Cooling Method

Multi-speed fan

Form Factors Supported

Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting information)

Material of Construction

Polycarbonate

Shipping Dimensions (hwd / in.)

12.40 x 10.50 x 10.70

Shipping Weight (lbs.)

24.50

Unit Dimensions (hwd / in.)

7 x 8.75 x 9

Unit Weight (lbs.)

18.6

Environmental

Relative Humidity

0-95% non-condensing

Line / Battery Transfer

Transfer Time (Line Power to Battery Mode)

Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)

Low Voltage Transfer to Battery Power

Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual)

High Voltage Transfer to Battery Power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272

Certifications

Certifications

RoHS Compliant

Warranty

Product Warranty Period (U.S. & Canada)

1-year limited warranty

Documents