Tripp Lite
OMNI900LCD
OmniSmart LCD 120V 900VA 475W Line-Interactive UPS, Tower, LCD display, USB port
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Overview
- UPC Code
- 037332125156
- UPS Type
- Line-Interactive
Output
- Output Volt Amp Capacity (VA)
- 900
- Output Watt Capacity (Watts)
- 475
- Nominal Voltage Details
- 115v nominal output in battery mode
- Frequency Compatibility
- 60 Hz
- Output Voltage Regulation (Battery Mode)
- +/- 5%
- UPS Output Receptacles (Surge Suppression Only)
- 4 UPS outlets, 4 surge-only outlets
- Hot-Swap PDU options
- PDUB15 (2U / 8 5-15R outlets)
- Output AC Waveform (AC Mode)
- Sine wave
- Output AC Waveform (Battery Mode)
- PWM sine wave
- Nominal Output Voltage(s) Supported
- 110V; 115V; 120V
- Output Receptacles
- (8) 5-15R
- Individually Controllable Load Banks
- No
Input
- Rated input current (Maximum Load)
- 12A
- Nominal Input Voltage(s) Supported
- 120V AC
- UPS Input Connection Type
- 5-15P; Right-Angled
- UPS Input Cord Length (ft.)
- 6
- Recommended Electrical Service
- 15A 120V
- Input Phase
- Single-Phase
Battery
- Full Load Runtime (min.)
- 3 min. (475w)
- Half Load Runtime (min.)
- 10 min. (240w)
- DC System Voltage (VDC)
- 12
- Battery Recharge Rate (Included Batteries)
- Less than 16 hours from 10% to 90%
- Internal UPS Replacement Battery Cartridge
- RBC51
- Battery Access
- Battery access door
- Battery Replacement Description
- Hot-swappable, user replaceable batteries
- Expandable Runtime
- No
Voltage Regulation
- Voltage Regulation Description
- Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 89
- Undervoltage Correction
- Input voltages between 89 and 104 are boosted by 14%
User Interface, Alerts & Controls
- Front Panel LCD Display
- Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace battery status; LCD screen rotates for rack/tower viewing
- Switches
- 2 Switches control off/on power status and alarm-cancel/self-test operation; dimmer switch controls LCD brightness
- Alarm Cancel Operation
- Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
- Audible Alarm
- Audible alarm indicates power-failure and low-battery status; alarm can be disabled using PowerAlert software
- LED Indicators
- Front panel LCD display
Surge / Noise Suppression
- UPS AC Suppression Joule Rating
- 870
- UPS AC Suppression Response Time
- Instantaneous
- EMI / RFI AC Noise Suppression
- Yes
Physical
- Installation Form Factors Supported with Included Accessories
- Tower
- Primary Form Factor
- Tower
- Primary UPS Depth (mm)
- 183
- Primary UPS Height (mm)
- 300
- Primary UPS Width (mm)
- 94
- Shipping Dimensions (hwd / in.)
- 15.50 x 4.70 x 10.50
- Shipping Weight (lbs.)
- 16.50
- UPS Housing Material
- ABS
- UPS Power Module Dimensions (hwd, in.)
- 11.8 x 3.7 x 7.2
- UPS Power Module Weight (kg)
- 6.85
- UPS Power Module Weight (lbs.)
- 15.1
Environmental
- Operating Temperature Range
- +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range
- +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity
- 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load)
- 61
- Battery Mode BTU / Hr. (Full Load)
- 485
- AC Mode Efficiency Rating (100% Load)
- 97%
Communications
- PowerAlert Software
- For local monitoring via the UPS’s built-in USB port, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable
- User supplies USB cable
- WatchDog Compatibility
- Supports Watchdog application, OS and hard-reboot restart options for remote applications
- Network UPS Tools Compatibility
- NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
- Communications Interface
- USB (HID enabled)
Line / Battery Transfer
- Transfer Time
- 4 milliseconds (AC to Battery); 3 milliseconds (Battery to AC)
- Low Voltage Transfer to Battery Power (Setpoint)
- 89
- High Voltage Transfer to Battery Power (Setpoint)
- 139
Special Features
- Cold Start (Startup in Battery Mode During a Power Failure)
- Cold-start operation supported
- Green Energy-Saving Features
- Greater than 95% efficiency - GREEN UPS
Certifications
- UPS Certifications
- Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI); ROHS (Restriction of Hazardous Substances)
Warranty
- Product Warranty Period (U.S. & Canada)
- 3-year limited warranty
- Connected Equipment Insurance (U.S., Canada & Puerto Rico)
- $200,000 Ultimate Lifetime Insurance
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther