Tripp Lite
SMART2200RMXL2U
SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
$928.65
1
Payment methods:
A total of 3 Parts In-Stock from 1 Distributor
Product Conditions:
Overview
- UPC Code
- 037332118059
- UPS Type
- Line-Interactive
Output
- Output Volt Amp Capacity (VA)
- 2200
- Output kVA Capacity (kVA)
- 2.20
- Output Watt Capacity (Watts)
- 1920
- Output kW Capacity (kW)
- 1.92
- Power Factor
- 0.87
- Nominal Voltage Details
- 120v nominal output in battery mode
- Frequency Compatibility
- 60 Hz
- Output Voltage Regulation (Line Mode)
- -14%, +6%
- Output Voltage Regulation (Battery Mode)
- +/- 5%
- Load Management Receptacles
- Two switched single outlet load banks (1 5-15/20R & 1 5-15R)
- Output AC Waveform (AC Mode)
- Pure Sine wave
- Output AC Waveform (Battery Mode)
- Pure Sine wave
- Output Capacity Details
- Output is reduced to 1600 watts maximum when used with external battery packs
- Nominal Output Voltage(s) Supported
- 110V; 115V; 120V
- Output Receptacles
- (4) 5-15R; (4) 5-15/20R
- Individually Controllable Load Banks
- Yes
Input
- Rated input current (Maximum Load)
- 16.0A
- Nominal Input Voltage(s) Supported
- 120V AC
- UPS Input Connection Type
- 5-20P
- UPS Input Cord Length (ft.)
- 10
- Recommended Electrical Service
- 20A 120V
- Input Phase
- Single-Phase
Battery
- Full Load Runtime (min.)
- 4.5 min. (1920w)
- Half Load Runtime (min.)
- 12 min. (960w)
- Expandable Battery Runtime
- Extended runtime supported via optional external battery packs
- External Battery Pack Compatibility
- BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)
- Expandable Runtime Description
- Maximum output capacity is 1600 watts when used with external battery packs
- DC System Voltage (VDC)
- 48
- Battery Recharge Rate (Included Batteries)
- Less than 4.5 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge
- RBC94-2U
- Battery Access
- Front panel battery access door
- Battery Replacement Description
- Hot-swappable, user replaceable batteries
- Expandable Runtime
- Yes
Voltage Regulation
- Voltage Regulation Description
- Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
- Overvoltage Correction
- Voltage reduction of 12% applies when input is between 127 and 145
- Undervoltage Correction
- Voltage boost of 12% applies when input voltage is between 96 and 108
- Severe Undervoltage Correction
- Voltage boost of 24% applies when input voltage is between 83 and 95
User Interface, Alerts & Controls
- Front Panel LCD Display
- Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
- Switches
- 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
- Alarm Cancel Operation
- Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
- Audible Alarm
- Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Surge / Noise Suppression
- UPS AC Suppression Joule Rating
- 570
- UPS AC Suppression Response Time
- Instantaneous
- EMI / RFI AC Noise Suppression
- Yes
Physical
- Cooling Method
- Fan
- Included Mounting Accessory Description
- Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
- Installation Form Factors Supported with Included Accessories
- 4 post 19 inch rackmount
- Installation Form Factors Supported with Optional Accessories
- 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
- Minimum Required Rack Depth with External Battery Pack (cm)
- 67
- Minimum Required Rack Depth with External Battery Pack (in.)
- 26.29
- Minimum Required Rack Depth without External Battery Pack (cm)
- 62
- Minimum Required Rack Depth without External Battery Pack (in.)
- 24.29
- Optional Mounting Accessory Notes
- Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
- Primary Form Factor
- Rackmount
- Primary UPS Depth (mm)
- 490
- Primary UPS Height (mm)
- 88
- Primary UPS Width (mm)
- 440
- Rack Height
- 2U
- Shipping Dimensions (hwd / in.)
- 8.50 x 24.30 x 21.60
- Shipping Weight (lbs.)
- 77.00
- UPS Housing Material
- Steel
- UPS Power Module Dimensions (hwd, in.)
- 3.46 x 17.32 x 19.29
- UPS Power Module Weight (kg)
- 26.13
- UPS Power Module Weight (lbs.)
- 57.6
Environmental
- Operating Temperature Range
- +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range
- +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity
- 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load)
- 306
- Battery Mode BTU / Hr. (Full Load)
- 1157
- AC Mode Efficiency Rating (100% Load)
- 96%
- Audible Noise
- 45 dBA maximum, front side 1m
Communications
- Network Management Cards
- SNMPWEBCARD ; TLNETCARD ; WEBCARDLX
- Network Monitoring Port Description
- Supports detailed monitoring of UPS and site power conditions
- PowerAlert Software
- For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable
- USB and DB9 cabling included
- WatchDog Compatibility
- Supports Watchdog application, OS and hard-reboot restart options for remote applications
- Network UPS Tools Compatibility
- NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
- Communications Interface
- USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Line / Battery Transfer
- Transfer Time
- 5 milliseconds (line to battery mode); 1 millisecond (battery to line mode)
- Low Voltage Transfer to Battery Power (Setpoint)
- 83
- High Voltage Transfer to Battery Power (Setpoint)
- 145
Special Features
- Grounding Lug
- Back panel grounding lug
- Cold Start (Startup in Battery Mode During a Power Failure)
- Cold-start operation supported
- High Availability UPS Features
- Hot swappable batteries
- Green Energy-Saving Features
- Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
Certifications
- UPS Certifications
- Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)
Warranty
- Product Warranty Period (Worldwide)
- 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- Connected Equipment Insurance (U.S., Canada & Puerto Rico)
- $250,000 Ultimate Lifetime Insurance
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther