SMART2200VS

Overview

UPC Code

037332115874

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

2200

Output kVA Capacity (kVA)

2.2

Output Watt Capacity (Watts)

1600

Output kW Capacity (kW)

1.6

Power Factor

0.73

Nominal Voltage Details

120v nominal output in battery mode

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line Mode)

-18% / +8%

Output Voltage Regulation (Battery Mode)

+/- 5%

Load Management Receptacles

Three switchable two-outlet 5-15R load banks

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

PWM sine wave

Nominal Output Voltage(s) Supported

110V; 115V; 120V

Output Receptacles

(7) 5-15R; (2) 5-15/20R

Individually Controllable Load Banks

Yes

Input

Rated input current (Maximum Load)

16A

Nominal Input Voltage(s) Supported

120V AC

UPS Input Connection Type

5-20P

Input Circuit Breakers

20A

UPS Input Cord Length (ft.)

8

Recommended Electrical Service

20A 120V

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

7 min. (1600w)

Half Load Runtime (min.)

19 min. (800w)

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 4 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC54

Battery Access

Battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

No

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 79V to 147V

Overvoltage Correction

Input voltages between 128 and 147 are reduced by 12%

Undervoltage Correction

Input voltages between 95 and 104 are boosted by 12%

Severe Undervoltage Correction

Input voltages between 79 and 94 are boosted by 24%

User Interface, Alerts & Controls

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure, overload and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Surge / Noise Suppression

UPS AC Suppression Joule Rating

480

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Primary Form Factor

Tower

Primary UPS Depth (mm)

305

Primary UPS Height (mm)

361

Primary UPS Width (mm)

234

Shipping Dimensions (hwd / in.)

19.30 x 16.50 x 14.20

Shipping Weight (lbs.)

58.00

UPS Housing Material

Polycarbonate

UPS Power Module Dimensions (hwd, in.)

14.2 x 9.2 x 12

UPS Power Module Weight (kg)

23.77

UPS Power Module Weight (lbs.)

52.4

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode Efficiency Rating (100% Load)

94%

Audible Noise

Audible Noise < 47dBA At Front Side 1 Meter

Communications

Network Management Cards

SNMPWEBCARD; TLNETCARD; WEBCARDLX

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total)

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

2 USB and 2 DB9 cables included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

Contact closure; DB9 Serial; Slot for SNMP/Web interface; USB

Line / Battery Transfer

Transfer Time

2-4 milliseconds

Low Voltage Transfer to Battery Power (Setpoint)

79

High Voltage Transfer to Battery Power (Setpoint)

147

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

Certifications

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

Warranty

Product Warranty Period (Worldwide)

2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

Documents