Tripp Lite
SMART500RT1U
SmartPro 120V 500VA 300W Line-Interactive UPS, 1U Rack/Tower, Network Card Options, USB, DB9 Serial
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Overview
- UPC Code
- 037332119247
- UPS Type
- Line-Interactive
Output
- Output Volt Amp Capacity (VA)
- 500
- Output Watt Capacity (Watts)
- 300
- Nominal Voltage Details
- 120v nominal output in battery mode
- Frequency Compatibility
- 60 Hz
- Output Voltage Regulation (Line Mode)
- -15%, +13%
- Output Voltage Regulation (Battery Mode)
- +/- 5%
- UPS Output Receptacles (Surge Suppression Only)
- 6 UPS outlets, 1 surge-only outlet
- Load Management Receptacles
- One switchable single-outlet 5-15R load bank
- Output AC Waveform (AC Mode)
- Sine wave
- Output AC Waveform (Battery Mode)
- PWM sine wave
- Nominal Output Voltage(s) Supported
- 110V; 115V; 120V
- Output Receptacles
- (6) 5-15R
- Individually Controllable Load Banks
- Yes
Input
- Rated input current (Maximum Load)
- 12A (Maximum input with 300W UPS and 1140W surge-only loads)
- Nominal Input Voltage(s) Supported
- 120V AC
- UPS Input Connection Type
- 5-15P
- Input Circuit Breakers
- 15A
- UPS Input Cord Length (ft.)
- 10
- Recommended Electrical Service
- 15A 120V
- Input Phase
- Single-Phase
Battery
- Full Load Runtime (min.)
- 3.2 min. (300w)
- Half Load Runtime (min.)
- 14.6 min. (150w)
- DC System Voltage (VDC)
- 12
- Battery Recharge Rate (Included Batteries)
- Less than 16 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge
- RBC62-1U
- Battery Access
- Battery access door
- Battery Replacement Description
- Hot-swappable, user replaceable batteries
- Expandable Runtime
- No
Voltage Regulation
- Voltage Regulation Description
- Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 90
- Undervoltage Correction
- Input voltages between 90 and 105 are boosted by 14%
User Interface, Alerts & Controls
- Switches
- 2 Switches control off/on power status and alarm-cancel/self-test operation
- Alarm Cancel Operation
- Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
- Audible Alarm
- Audible alarm indicates power-failure, overload and low-battery conditions
- LED Indicators
- 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Surge / Noise Suppression
- EMI / RFI AC Noise Suppression
- Yes
- AC Suppression Joule Rating
- 567
- AC Suppression Response Time
- Instantaneous
Physical
- Included Mounting Accessory Description
- Included mounting brackets provide front-rail installation in 2 or 4 post racks, plus upright tower configurations
- Installation Form Factors Supported with Included Accessories
- 2 post 19 inch rackmount; 4 post 19 inch rackmount; Tower
- Minimum Required Rack Depth (inches)
- 14.26
- Primary Form Factor
- Rackmount
- Primary UPS Depth (mm)
- 286
- Primary UPS Height (mm)
- 44
- Primary UPS Width (mm)
- 440
- Rack Height
- 1U
- Shipping Dimensions (hwd / in.)
- 15.40 x 4.80 x 22.10
- Shipping Weight (lbs.)
- 20.90
- UPS Housing Material
- Steel
- UPS Power Module Dimensions (hwd, in.)
- 1.73 x 17.32 x 11.26
- UPS Power Module Weight (kg)
- 7.98
- UPS Power Module Weight (lbs.)
- 17.6
Environmental
- Operating Temperature Range
- +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range
- +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity
- 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load)
- 44
- AC Mode Efficiency Rating (100% Load)
- 96%
- Audible Noise
- 45 dBA maximum, front side 1m
Communications
- Network Management Cards
- SNMPWEBCARD ; TLNETCARD ; WEBCARDLX
- Network Monitoring Port Description
- Supports detailed monitoring of UPS and site power conditions
- PowerAlert Software
- For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable
- USB and DB9 cabling included
- WatchDog Compatibility
- Supports Watchdog application, OS and hard-reboot restart options for remote applications
- Network UPS Tools Compatibility
- NUT compatible. See full list of compatible Tripp Lite products at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
- Communications Interface
- USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Line / Battery Transfer
- Transfer Time
- 4-7 milliseconds
- Low Voltage Transfer to Battery Power (Setpoint)
- 90
- High Voltage Transfer to Battery Power (Setpoint)
- 140
Special Features
- Grounding Lug
- Back panel grounding lug
- Cold Start (Startup in Battery Mode During a Power Failure)
- Cold-start operation supported
- High Availability UPS Features
- Hot swappable batteries
Certifications
- UPS Certifications
- Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico)
Warranty
- Product Warranty Period (Worldwide)
- 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- Connected Equipment Insurance (U.S., Canada & Puerto Rico)
- $250,000 Ultimate Lifetime Insurance
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther