Tripp Lite
SMARTINT1500
SmartPro 230V 1.5kVA 940W Line-Interactive UPS, Tower, DB9, 6 Outlets
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Overview
- UPC Code
- 037332033925
- UPS Type
- Line-Interactive
Output
- Output Volt Amp Capacity (VA)
- 1500
- Output kVA Capacity (kVA)
- 1.5
- Output Watt Capacity (Watts)
- 940
- Nominal Voltage Details
- 230V nominal output in battery mode
- Frequency Compatibility
- 50 / 60 Hz
- Frequency Compatibility Details
- Automatic frequency selection
- Output Voltage Regulation (Line Mode)
- -15%, +8%
- Output Voltage Regulation (Battery Mode)
- +/- 5%
- Included Output Power Cables
- Includes 2 C13 to C14 output power cables
- Output AC Waveform (AC Mode)
- Sine wave
- Output AC Waveform (Battery Mode)
- PWM sine wave
- Nominal Output Voltage(s) Supported
- 220V; 230V; 240V
- Output Receptacles
- (6) C13
- Individually Controllable Load Banks
- No
Input
- Rated input current (Maximum Load)
- 6.5A
- Nominal Input Voltage(s) Supported
- 230V AC
- UPS Input Connection Type
- C14 inlet
- Input Circuit Breakers
- 10A
- Input Phase
- Single-Phase
Battery
- Full Load Runtime (min.)
- 7 min. (940w)
- Half Load Runtime (min.)
- 20 min. (470w)
- DC System Voltage (VDC)
- 36
- Battery Recharge Rate (Included Batteries)
- Less than 4 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge
- RBC53
- Battery Access
- Battery access door
- Battery Replacement Description
- Hot-swappable, user replaceable batteries
- Expandable Runtime
- No
Voltage Regulation
- Voltage Regulation Description
- Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 166 to 277
- Overvoltage Correction
- Input voltages between 243 and 277 are reduced by 12%
- Undervoltage Correction
- Input voltages between 191 and 215 are boosted by 10%
- Severe Undervoltage Correction
- Input voltages between 165 and 190 are boosted by 22%
User Interface, Alerts & Controls
- Switches
- 2 Switches control off/on power status and alarm-cancel/self-test operation
- Alarm Cancel Operation
- Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
- Audible Alarm
- Audible alarm indicates power-failure and low-battery conditions
- LED Indicators
- 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Surge / Noise Suppression
- UPS AC Suppression Joule Rating
- 480
- UPS AC Suppression Response Time
- Instantaneous
- EMI / RFI AC Noise Suppression
- Yes
Physical
- Installation Form Factors Supported with Included Accessories
- Tower
- Installation Form Factors Supported with Optional Accessories
- Wallmount (UPSWM - tower mounting kit)
- Primary Form Factor
- Tower
- Primary UPS Depth (mm)
- 234
- Primary UPS Height (mm)
- 325
- Primary UPS Width (mm)
- 191
- Shipping Dimensions (hwd / in.)
- 17.00 x 11.20 x 13.10
- Shipping Weight (lbs.)
- 40.30
- UPS Housing Material
- Polycarbonate
- UPS Power Module Dimensions (hwd, in.)
- 12.8 x 7.5 x 9.2
- UPS Power Module Weight (kg)
- 17.51
- UPS Power Module Weight (lbs.)
- 38.6
Environmental
- Operating Temperature Range
- +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range
- +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity
- 0 to 95%, non-condensing
- AC Mode Efficiency Rating (100% Load)
- 94%
Communications
- Network Monitoring Port Description
- Supports detailed monitoring of UPS and site power conditions; contact closure communications via 2nd DB9 port (2 total)
- PowerAlert Software
- For local monitoring via the UPS’s built-in DB9 port, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable
- 2 DB9 cables included
- Communications Interface
- DB9 Serial; Contact closure
Line / Battery Transfer
- Transfer Time
- 2-4 milliseconds
- Low Voltage Transfer to Battery Power (Setpoint)
- 165
- High Voltage Transfer to Battery Power (Setpoint)
- n/a
Special Features
- Cold Start (Startup in Battery Mode During a Power Failure)
- Cold-start operation supported
- High Availability UPS Features
- Hot swappable batteries
Certifications
- UPS Certifications
- Tested to UL1778 (USA); Tested to CSA (Canada); CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Tested to IRAM (Argentina)
- UPS Certification Details
- EMI approvals 62040
Warranty
- Product Warranty Period (International)
- 2-year limited warranty
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther