SMARTINT3000VS

Overview

UPC Code

037332120311

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

3000

Output kVA Capacity (kVA)

3

Output Watt Capacity (Watts)

2250

Output kW Capacity (kW)

2.25

Power Factor

0.75

Nominal Voltage Details

230v nominal inverter output voltage

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Automatic frequency selection

Output Voltage Regulation (Line Mode)

-19% +8%

Output Voltage Regulation (Battery Mode)

+/- 5%

Included Output Power Cables

Includes 3 C13 to C14 output power cables

Load Management Receptacles

Three switchable two-outlet C13 load banks

Output Circuit Breakers

10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

PWM sine wave

Output Capacity Details

Output is reduced to 1500W maximum with 2 or more external battery packs

Nominal Output Voltage(s) Supported

220V; 230V; 240V

Output Receptacles

(8) C13; (1) C19

Individually Controllable Load Banks

Yes

Input

Rated input current (Maximum Load)

15.4A

Nominal Input Voltage(s) Supported

230V AC

UPS Input Connection Type

C20 inlet

UPS Input Connection Description

User supplies input cabling with C19 output connection

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

4 min. (2250w)

Half Load Runtime (min.)

14 min. (1125w)

Expandable Battery Runtime

Extended runtime supported via optional external battery packs

External Battery Pack Compatibility

BP48V27-2US (multi-pack compatible); BP48V60RT-3U (multi-pack compatible)

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 4 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC54

Battery Access

Battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 282V

Overvoltage Correction

Input voltages between 245 and 282 are reduced by 12%

Undervoltage Correction

Input voltages between 177 and 199 are boosted by 14%

Severe Undervoltage Correction

Input voltages between 151 and 176 are boosted by 30%

User Interface, Alerts & Controls

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure, overload and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Surge / Noise Suppression

UPS AC Suppression Joule Rating

480

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Primary Form Factor

Tower

Primary UPS Depth (mm)

305

Primary UPS Height (mm)

361

Primary UPS Width (mm)

234

Shipping Dimensions (hwd / in.)

19.90 x 15.10 x 16.10

Shipping Weight (lbs.)

67.80

UPS Housing Material

Polycarbonate

UPS Power Module Dimensions (hwd, in.)

14.2 x 9.2 x 12

UPS Power Module Weight (kg)

27.67

UPS Power Module Weight (lbs.)

61

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode Efficiency Rating (100% Load)

94%

Audible Noise

Audible Noise < 47dBA At Front Side 1 Meter

Communications

Network Management Cards

SNMPWEBCARD; TLNETCARD; WEBCARDLX

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

2 USB and 2 DB9 cables included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

2-4 milliseconds

Low Voltage Transfer to Battery Power (Setpoint)

151

High Voltage Transfer to Battery Power (Setpoint)

282

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

Certifications

UPS Certifications

CE

UPS Certification Details

CE 62040

Warranty

Product Warranty Period (International)

2-year limited warranty

Documents