SMX2200XLRT2U

Overview

UPC Code

037332124562

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

2200

Output kVA Capacity (kVA)

2.20

Output Watt Capacity (Watts)

1920

Output kW Capacity (kW)

1.92

Power Factor

0.87

Nominal Voltage Details

230V nominal output in battery mode

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Automatic frequency selection

Output Voltage Regulation (Line Mode)

-15%, +6%

Output Voltage Regulation (Battery Mode)

+/- 5%

Included Output Power Cables

Includes 3 C13 to C14 output power cables

Load Management Receptacles

Two switchable single-outlet C13 load banks

Hot-Swap PDU options

PDUBHV20 (2U / 6 C13, 2 C19 outlets)

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Nominal Output Voltage(s) Supported

220V; 230V; 240V

Output Receptacles

(8) C13

Individually Controllable Load Banks

Yes

Input

Rated input current (Maximum Load)

10.7A

Nominal Input Voltage(s) Supported

230V AC

UPS Input Connection Type

C20 inlet

UPS Input Connection Description

IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

Input Circuit Breakers

15A

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

5 min. (1920w)

Half Load Runtime (min.)

11.9 min. (960w)

Expandable Battery Runtime

Extended runtime supported via optional external battery packs

External Battery Pack Compatibility

BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 4.5 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC94-2U

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 158 to 278

Overvoltage Correction

Voltage reduction of 12% applies when input is between 244-278V

Undervoltage Correction

Voltage boost of 12% applies when input voltage is between 183-206V

Severe Undervoltage Correction

Voltage boost of 24% applies when input voltage is between 158-182V

User Interface, Alerts & Controls

Front Panel LCD Display

Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)

Switches

3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions

Alarm Cancel Operation

Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available

Audible Alarm

Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Surge / Noise Suppression

UPS AC Suppression Joule Rating

350

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Included Mounting Accessory Description

Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )

Minimum Required Rack Depth with External Battery Pack (cm)

67

Minimum Required Rack Depth with External Battery Pack (in.)

26.5

Minimum Required Rack Depth without External Battery Pack (cm)

55

Minimum Required Rack Depth without External Battery Pack (in.)

21.75

Optional Mounting Accessory Notes

Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

495

Primary UPS Height (mm)

89

Primary UPS Width (mm)

445

Rack Height

2U

Shipping Dimensions (hwd / in.)

8.70 x 24.20 x 21.50

Shipping Weight (lbs.)

81.05

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

3.50 x 17.50 x 19.50

UPS Power Module Weight (kg)

31.18

UPS Power Module Weight (lbs.)

68.75

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

161

AC Mode Efficiency Rating (100% Load)

98%

Audible Noise

45 dBA maximum, front side 1m

Communications

Network Management Cards

SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; RELAYIOCARD

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB, DB9 and EPO cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

6 ms. (AC to DC) / 1 ms. (DC to AC)

Low Voltage Transfer to Battery Power (Setpoint)

158V

High Voltage Transfer to Battery Power (Setpoint)

278V

Special Features

Grounding Lug

Back panel grounding lug

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

Certifications

UPS Certifications

CE

UPS Certification Details

IEC 62040-1, IEC 62040-2 Class A EMI, GOST

Warranty

Product Warranty Period (International)

2-year limited warranty

Documents