Tripp Lite
SMX700HGL
SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 22 Parts In-Stock from 1 Distributor
Product Conditions:
Overview
- UPC Code
- 037332224804
- UPS Type
- Line-Interactive
Output
- Output Volt Amp Capacity (VA)
- 700
- Output Watt Capacity (Watts)
- 450
- Nominal Voltage Details
- 230v nominal inverter output voltage
- Frequency Compatibility
- 50 / 60 Hz
- Frequency Compatibility Details
- Automatic frequency selection
- Output Voltage Regulation (Line Mode)
- -18%, +8%
- Output AC Waveform (Battery Mode)
- PWM sine wave
- Nominal Output Voltage(s) Supported
- 220V; 230V; 240V
- Output Receptacles
- (6) C13
- Individually Controllable Load Banks
- No
Input
- Rated input current (Maximum Load)
- 3.6A
- Nominal Input Voltage(s) Supported
- 230V AC
- UPS Input Connection Type
- C14 inlet
- UPS Input Cord Length (ft.)
- 0.50
- Recommended Electrical Service
- 10A 230V
- Voltage Compatibility (VAC)
- 230
- Input Phase
- Single-Phase
Battery
- Full Load Runtime (min.)
- 14.5 min. (450w)
- Half Load Runtime (min.)
- 36 min. (225w)
- DC System Voltage (VDC)
- 36
- Battery Recharge Rate (Included Batteries)
- Less than 3.6 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge
- RBC53L
- Battery Access
- Battery access door allows hot swap battery replacement without powering connected equipment off
- Typical Battery Lifespan
- 3-6 years, depending on usage
- Expandable Runtime
- No
Voltage Regulation
- Voltage Regulation Description
- Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V AC
- Overvoltage Correction
- Input voltages between 206 and 245V AC are reduced by 9%
- Undervoltage Correction
- Input voltages between 183 and 199 are boosted by 10%
- Severe Undervoltage Correction
- Input voltages between 155 and 182 are boosted by 21%
User Interface, Alerts & Controls
- Switches
- Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
- Audible Alarm
- 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone). Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure, overload conditions and Low Battery events, using our Free PowerAlert UPS management software.
- LED Indicators
- 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Surge / Noise Suppression
- UPS AC Suppression Joule Rating
- 340
- EMI / RFI AC Noise Suppression
- Yes
- AC Suppression Response Time
- Instantaneous
Physical
- Cooling Method
- Cooling via rear-exit cooling fan
- Installation Form Factors Supported with Optional Accessories
- Wallmount (UPSWM - tower mounting kit)
- Primary Form Factor
- Tower
- Primary UPS Depth (mm)
- 229
- Primary UPS Height (mm)
- 325
- Primary UPS Width (mm)
- 191
- Shipping Dimensions (hwd / in.)
- 18.50 x 12.20 x 13.38
- UPS Housing Material
- PVC
- UPS Power Module Dimensions (hwd, in.)
- 12.8 x 7.5 x 9
- UPS Power Module Weight (kg)
- 19.10
- UPS Power Module Weight (lbs.)
- 42.1
Environmental
- Operating Temperature Range
- +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range
- +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity
- 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load)
- 208.6
- Battery Mode BTU / Hr. (Full Load)
- 189.1
Communications
- Communications Interface
- USB; DB9 Serial
Line / Battery Transfer
- Transfer Time
- 5 milliseconds
- Low Voltage Transfer to Battery Power (Setpoint)
- 155
- High Voltage Transfer to Battery Power (Setpoint)
- 274
Special Features
- Grounding Lug
- Equipotential connection (back panel grounding lug)
- Cold Start (Startup in Battery Mode During a Power Failure)
- Cold-start operation supported
Certifications
- UPS Certifications
- CE; Tested to UL60601-1 (medical grade)
Warranty
- Product Warranty Period (International)
- 5-year limited warranty
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther