SU3000LCD2UHV

Overview

UPC Code

037332180742

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

3000

Output kVA Capacity (kVA)

3

Output Watt Capacity (Watts)

2700

Output kW Capacity (kW)

2.7

Power Factor

0.9

Crest Factor

3:1

Nominal Voltage Details

Nominal output voltage is user configured on first power-on

Frequency Compatibility

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency Compatibility Details

Output frequency matches input nominal on startup; Output capacity de-rates by 30% during frequency conversion operation

Output Voltage Regulation (Line Mode)

+/- 2%

Output Voltage Regulation (Economy Line Mode)

+/- 10%

Output Voltage Regulation (Battery Mode)

+/- 2%

Load Management Receptacles

Two switchable outlet load banks (2 NEMA 6-15/20R outlets per bank)

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

DE-RATING INFORMATION: Max output in Frequency Conversion mode is reduced to 1890 watts for 208/220/230/240V output voltages; Max output is reduced to 2160W at 200V output voltage in all operating modes OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% for 3 minutes, 150% for 30 seconds and >150% for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits).

Nominal Output Voltage(s) Supported

200V; 208V; 220V; 230V; 240V

Output Receptacles

(6) 6-15/20R; (2) L6-20R

Individually Controllable Load Banks

Yes

Input

Rated input current (Maximum Load)

14.97A

Nominal Input Voltage(s) Supported

200V AC; 208V AC; 220V AC; 230V AC; 240V AC

UPS Input Connection Type

L6-20P

UPS Input Cord Length (ft.)

10

Recommended Electrical Service

208/240V 20A

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

5 min. (2700w)

Half Load Runtime (min.)

13.5 min. (1350w)

Expandable Battery Runtime

Supports extended runtime with optional external battery packs

External Battery Pack Compatibility

BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible); BP72V18 -2US (multi-pack compatible)

DC System Voltage (VDC)

72

Battery Recharge Rate (Included Batteries)

3.0 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC72S

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

2% output voltage regulation during overvoltages to 288

Undervoltage Correction

2% output voltage regulation during undervoltages to 160V (100% load), 130V (70% load), 100V (30% load)

User Interface, Alerts & Controls

Front Panel LCD Display

Interactive front-panel LCD interface reports UPS operating mode, detailed UPS status and site-power information; LCD interface also enables a variety of advanced UPS setup and configuration options

Switches

5 front panel switches: On/Off, Up, Down and Escape

Alarm Cancel Operation

Power-fail alarm can be silenced by following on-screen prompts

Audible Alarm

Audible alarm indicates power failure, low battery, overload and fault

LED Indicators

4 front panel LEDs: AC input (green), AC output (green), Battery (yellow), Fault (red)

Surge / Noise Suppression

UPS Dataline Suppression Details

Single line dialup / network dataline protection included

EMI / RFI AC Noise Suppression

Yes

AC Suppression Joule Rating

570

AC Suppression Response Time

Instantaneous

Physical

Cooling Method

Fan

Included Mounting Accessory Description

4 post installation accessories included

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount ( 2POSTRMKITWM ); Tower ( 2-9USTAND )

Minimum Required Rack Depth with External Battery Pack (cm)

77

Minimum Required Rack Depth with External Battery Pack (in.)

30.25

Minimum Required Rack Depth without External Battery Pack (cm)

74

Minimum Required Rack Depth without External Battery Pack (in.)

29.25

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

616

Primary UPS Height (mm)

88

Primary UPS Width (mm)

438

Rack Height

2U

Shipping Dimensions (hwd / in.)

9.45 x 23.62 x 29.92

Shipping Weight (lbs.)

86.00

UPS Housing Material

Metal

UPS Power Module Dimensions (hwd, in.)

3.46 x 17.24 x 24.25

UPS Power Module Weight (kg)

32.12

UPS Power Module Weight (lbs.)

70.81

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

Relative Humidity

5 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

933

AC Economy Mode BTU / Hr. (Full Load)

588

Battery Mode BTU / Hr. (Full Load)

1399

AC Mode Efficiency Rating (100% Load)

>90%

AC Economy Mode Efficiency Rating (100% Load)

>95%

Audible Noise

<50dB at front side 1M

Operating Elevation (m)

Up to 3000m

Communications

Network Management Cards

SNMPWEBCARD ; WEBCARDLX

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 plus assignable contact closure pin functions for On-battery, On bypass, Output-on and Low-battery conditions and remote Shutdown, Output-off, Reboot and Power-toggle operations

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode; 4 ms. transfer time during economy mode operation

Low Voltage Transfer to Battery Power (Setpoint)

160V (100% load), 140V (66% load), 120V (33% load)

High Voltage Transfer to Battery Power (Setpoint)

288V

Special Features

Grounding Lug

Back panel grounding lug included

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Battery Independent Restart; Hot swappable batteries

Green Energy-Saving Features

High efficiency economy mode operation; Individually controllable load banks

Certifications

UPS Certifications

ENERGY STAR Qualified; Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

Documents