SU80K

Overview

UPC Code

037332141330

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

80000

Output kVA Capacity (kVA)

80

Output Watt Capacity (Watts)

64000

Output kW Capacity (kW)

64

Power Factor

0.8

Crest Factor

3:1

Frequency Compatibility

50 / 60 Hz

Output Voltage Regulation (Line Mode)

+/-1%

Output Voltage Regulation (Battery Mode)

+/-1%

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Nominal Output Voltage(s) Supported

120/208V 3-PH Wye

Output Receptacles

Hardwire

Individually Controllable Load Banks

No

Input

Nominal Input Voltage(s) Supported

120/208V 3-PH Wye

Nominal Input Voltage Description

3-Phase Wye, 4 wire (L1, L2, L3, N, G)

UPS Input Connection Type

Hardwire

Input Phase

3-Phase

Battery

Expandable Battery Runtime

Battery set sold separate

External Battery Pack Compatibility

BP480V200; BP480V300; BP480V400; BP480V40C; BP480V500

Expandable Runtime Description

External battery pack wiring is contractor supplied

DC System Voltage (VDC)

+/- 240VDC

Battery Recharge Rate (Included Batteries)

2 - 4 hours from 10% to 90%

Battery Replacement Description

Hot-swappable, replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

Maintains continuous operation without using battery power during overvoltages to 150 / 260 (3-Phase, 4-Wire, wye), reducing output within 1% of nominal

Undervoltage Correction

Maintains continuous operation without using battery power during brownout / undervoltage conditions to 94 / 163 (3-Phase, 4-Wire, wye)

User Interface, Alerts & Controls

Switches

ON button turns UPS's inverter ON. OFF button turns UPS's inverter OFF. LCD Display Control Buttons browses through and selects items displayed on LCD screen. Emergency Power Off button turns UPS output OFF and disables Bypass output. Manual Bypass breaker bypasses the UPS's inverter during maintenance.

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch

Audible Alarm

Alarms warn against a variety of operational conditions: low-battery, overload, shutdown, bypass and more

LED Indicators

4-LED Display: Displays normal AC input, on battery power, bypass input and fault conditions

Surge / Noise Suppression

EMI / RFI AC Noise Suppression

Yes

AC Suppression Joule Rating

4675

AC Suppression Response Time

Instantaneous

Physical

Cooling Method

Fans

Installation Form Factors Supported with Included Accessories

Tower

Primary Form Factor

Tower

Primary UPS Depth (mm)

986

Primary UPS Height (mm)

1,697

Primary UPS Width (mm)

521

Shipping Dimensions (hwd / in.)

75.00 x 28.50 x 48.00

Shipping Weight (lbs.)

1642.50

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

66.8 x 20.5 x 38.8

UPS Power Module Weight (kg)

654.99

UPS Power Module Weight (lbs.)

1444

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

18665

Battery Mode BTU / Hr. (Full Load)

19005

Communications

Network Management Cards

SNMPWEBCARD; TLNETCARD; WEBCARDLX; MODBUSCARD; RELAYIOCARD

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

DB9 cabling included

Communications Interface

DB9 Serial; Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode

Low Voltage Transfer to Battery Power (Setpoint)

Maintains continuous operation during undervoltages as low as 94 / 163V AC (3-Phase, 4-Wire, wye). Below this point, output is maintained utilizing battery reserves.

High Voltage Transfer to Battery Power (Setpoint)

Maintains continuous operation during overvoltages as high as 150 / 260V AC (3-Phase, 4-Wire, wye). Above this point, output is maintained utilizing battery reserves.

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Hot swappable batteries

Green Energy-Saving Features

High efficiency economy mode operation; Schedulable daily hours of economy mode operation

Certifications

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances)

Warranty

Product Warranty Period (U.S. & Canada)

1-year limited warranty

Documents