SUINT1000LCD2UN

Overview

UPC Code

037332253569

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

1000

Output kVA Capacity (kVA)

1

Output Watt Capacity (Watts)

900

Output kW Capacity (kW)

0.9

Power Factor

0,9

Crest Factor

3:1

Nominal Voltage Details

Nominal output voltage is user configured on first power-on

Frequency Compatibility

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency Compatibility Details

Output frequency matches input nominal on startup; Output capacity de-rates by 30% during frequency conversion operation

Output Voltage Regulation (Line Mode)

+/- 2%

Output Voltage Regulation (Economy Line Mode)

+/- 10%

Output Voltage Regulation (Battery Mode)

+/- 2%

Included Output Power Cables

Includes 2 C13 to C14 power cables

Load Management Receptacles

Two switchable 2-outlet load banks

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

DE-RATING INFORMATION: Max output in Frequency Conversion mode is reduced to 630 watts for 208/220/230/240V output voltages; Max output is 720W (504W in Frequency Conversion mode) at 200V output voltage OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% for 3 minutes, 150% for 30 seconds and >150% for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits).

Nominal Output Voltage(s) Supported

200V; 208V; 220V; 230V; 240V

Output Receptacles

(6) C13

Individually Controllable Load Banks

Yes

Input

Rated input current (Maximum Load)

4.99A

Nominal Input Voltage(s) Supported

200V AC; 208V AC; 220V AC; 230V AC; 240V AC

UPS Input Connection Type

C14 inlet

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

4.7 min. (900w)

Half Load Runtime (min.)

12.3 min. (450w)

Expandable Battery Runtime

Supports extended runtime with optional external battery packs

External Battery Pack Compatibility

BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V36-2US (multi-pack compatible); BP24V70-3U (multi-pack compatible)

DC System Voltage (VDC)

24

Battery Recharge Rate (Included Batteries)

Less than 4.1 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC24S

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

2% output voltage regulation during overvoltages to 288V

Undervoltage Correction

2% output voltage regulation during undervoltages to 160V (100% load), 130V (70% load), 100V (30% load)

User Interface, Alerts & Controls

Front Panel LCD Display

Interactive front-panel LCD interface reports UPS operating mode, detailed UPS status and site-power information; LCD interface also enables a variety of advanced UPS setup and configuration options

Switches

5 front panel switches: On/Off, Up, Down and Escape

Alarm Cancel Operation

Power-fail alarm can be silenced by following on-screen prompts

Audible Alarm

Audible alarm indicates power failure, low battery, overload and fault

LED Indicators

4 front panel LEDs: AC input (green), AC output (green), Battery (yellow), Fault (red)

Surge / Noise Suppression

UPS Dataline Suppression Details

Single line dialup / network dataline protection included

EMI / RFI AC Noise Suppression

Yes

AC Suppression Joule Rating

627

AC Suppression Response Time

Instantaneous

Physical

Cooling Method

Fan

Included Mounting Accessory Description

Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )

Minimum Required Rack Depth with External Battery Pack (cm)

47

Minimum Required Rack Depth with External Battery Pack (in.)

18.63

Minimum Required Rack Depth without External Battery Pack (cm)

45

Minimum Required Rack Depth without External Battery Pack (in.)

17.88

Optional Mounting Accessory Notes

Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

397

Primary UPS Height (mm)

88

Primary UPS Width (mm)

438

Rack Height

2U

Shipping Dimensions (hwd / in.)

9.60 x 19.80 x 23.50

UPS Housing Material

Metal

UPS Power Module Dimensions (hwd, in.)

3.46 x 17.24 x 15.63

UPS Power Module Weight (kg)

12.70

UPS Power Module Weight (lbs.)

28

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

Relative Humidity

5 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

245

AC Economy Mode BTU / Hr. (Full Load)

128

Battery Mode BTU / Hr. (Full Load)

500

AC Mode Efficiency Rating (100% Load)

>93%

AC Economy Mode Efficiency Rating (100% Load)

>96%

Audible Noise

<45dB at front side 1M

Communications

PowerAlert Software

Available for download at www.tripplite.com

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

Contact closure; DB9 Serial; EPO (emergency power off); Included network card; Slot for SNMP/Web interface; USB (HID enabled)

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode; 3-9 ms. transfer time during economy mode operation

Low Voltage Transfer to Battery Power (Setpoint)

160V (100% load), 140V (66% load), 120V (33% load)

High Voltage Transfer to Battery Power (Setpoint)

288V

Special Features

Grounding Lug

Back panel grounding lug included

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Battery Independent Restart; Hot swappable batteries

Green Energy-Saving Features

High efficiency economy mode operation; Individually controllable load banks

Certifications

UPS Certifications

CE; ENERGY STAR Qualified; Tested to CSA (Canada); Tested to EAC (Belarus, Kazakhstan, Russia); Tested to SASO (Saudi Arabia); Tested to UL1778 (USA)

UPS Certification Details

IEC62040-1:2008+A1; UL1778 5th; Meets EMI approvals EN62040-2 (Cat C2), FCC Class A

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

Documents