UT750UL

Additional Information

Part Number

UT750UL

UPC

037332124401

Overview

UPC Code

037332124401

Output

Frequency Compatibility

60 Hz

Pure Sine Wave Output

No

Output (Watts)

750

Nominal Output Voltage(s) Supported

120V

Output Receptacles

(2) 5-15R

Continuous Output Capacity (Watts)

750

Peak Output Capacity (Watts)

1500

Output Voltage Regulation

LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%)

Output Frequency Regulation

60 Hz (+/- 0.3Hz)

Overload Protection

Includes 10A input breaker dedicated to the charging system and 12A output breaker for AC output loads.

Outlet Details

2 NEMA 5-15R GFCI protected outlets

Input

Nominal Input Voltage(s) Supported

120V AC

Recommended Electrical Service

DC INPUT: Requires 12VDC input source capable of delivering 73A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended.

Maximum Input Amps / Watts

DC INPUT: Full continuous load of 73A at 12 VDC. AC INPUT 29 amps at 120 VAC with full inverter and charger load (9.3A max charger only / combined input load to support charger and AC output is automatically controllable to 66% - 33% - 0% based on AC)

Input Connection Type

DC INPUT: Set of two DC bolt-down terminals. AC INPUT: NEMA 5-15R input plug

Input Cord Length Details

DC INPUT: User supplies cabling. 6 gauge or larger (see manual) AC INPUT: attached 6ft. AC line cord with plug.

Voltage Compatibility (VAC)

120

Voltage Compatibility (VDC)

12

Battery

Expandable Battery Runtime

Runtime is expandable with any number of user supplied wet or gel or AGM type Batteries.

DC System Voltage (VDC)

12

Battery Pack Accessory (Optional)

98-121 sealed lead acid battery (optional)

Battery Charge

11A / 45A (selectable)

Expandable Runtime

Yes

User Interface, Alerts & Controls

Front Panel LEDs

Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences

Switches

3 position on / off remote switch enables simple on / off power control plus "auto/ remote"

Surge / Noise Suppression

AC Suppression Joule Rating

450

Physical

Cooling Method

Multi-speed fan

Form Factors Supported

Mounting slots enable permanent placement of inverter on any horizontal surface. (see manual for additional mounting information)

Material of Construction

Polycarbonate

Receptacle Color

White

Shipping Dimensions (hwd / in.)

12.60 x 10.70 x 10.70

Shipping Weight (lbs.)

20.20

Unit Dimensions (hwd / in.)

7 x 8.75 x 9

Unit Weight (lbs.)

17.4

Environmental

Relative Humidity

0-95% non-condensing

Line / Battery Transfer

Transfer Time (Line Power to Battery Mode)

16.6 milliseconds (typical -compatible with many computers, servers and networking equipment-verify transfer time compatibility loads for UPS applications)

Low Voltage Transfer to Battery Power

In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105 - see manual)

High Voltage Transfer to Battery Power

In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases to 145V (user adjustable to 145 - see manual)

Special Features

Load Sensing

Load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level.

Certifications

Certifications

Tested to UL 458 (USA) and CSA (Canada)

Warranty

Product Warranty Period (U.S. & Canada)

30-month limited warranty

Documents