Wago
2065-100/998-403
SMD PCB terminal block; push-button; 0.75 mm²; Pin spacing 6.5 mm; 1-pole; Push-in CAGE CLAMP®; in tape-and-reel packaging; Without housing; 0,75 mm²; silver-colored
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 2,728 Parts In-Stock from 9 Distributors
Product Conditions:
Additional Information
- Part Number
- 2065-100/998-403
- UPC
- 4055143665469
- Tariff Code
- 85369010000
- ETIM
- Group Code : EG000012
- Group Description : Terminal blocks
- Class Description : Single- and multi-pole terminal strip
- Class Code : EC001284
- Version : 7
Pcb Contact
- PCB contact
- SMD
- Solder pin arrangement
- Over the entire terminal strip (in-line)
- Number of solder pins per potential
- 1
Ratings Per Iec/En
- Ratings per
- IEC/EN 60664-1
- Rated voltage (III/2)
- 320 V
- Rated impulse voltage (III/2)
- 4 kV
- Nominal voltage (II/2)
- 630 V
- Rated surge voltage (II/2)
- 4 kV
- Rated current
- 9 A
- Legend (ratings)
- (III / 2) ≙ Overvoltage category III / Pollution degree 2
Environmental Requirements
- Limit temperature range
- -60 … +120 °C
Ratings Per Ul 1977
- Rated voltage (UL 1977)
- 600 V
- Rated current UL 1977
- 9 A
Physical Data
- Pin spacing
- 6.5 mm / 0.256 inches
- Width
- 2.9 mm / 0.114 inches
- Height
- 2.7 mm / 0.106 inches
- Depth
- 8 mm / 0.315 inches
- Reel diameter of tape-and-reel packaging
- 330 mm
- Tape width
- 16 mm
Material Data
- Note (material data)
- <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
- Color
- Silver-colored
- Clamping spring material
- Chrome-nickel spring steel (CrNi)
- Contact material
- Copper alloy
- Contact plating
- Tin
- Fire load
- 0.000 MJ
- Weight
- 0.278 g
Specifications
- Product Group Code
- 0033
Commercial Data
- Packaging type
- Box
- Country of origin
- CH
- GTIN
- 4055143665469
- Customs tariff number
- 85369010000
Notes
- Safety information
- Notice: Terminal block without insulation housing! Protection against accidental contact must be provided at voltages higher than low voltages (e.g., SELV/PELV) for the relevant application.
- Note
- The ratings are based on an example pin spacing of 6.5 mm.The layout must meet the requirements of the insulation coordination standard EN/IEC 60664-1 and applicable end product standards.
Connection 1
- Connection technology
- Push-in CAGE CLAMP®
- Actuation type
- Push-button
- Solid conductor
- 0.2 … 0.75 mm² / 24 … 18 AWG
- Fine-stranded conductor
- 0.2 … 0.75 mm² / 24 … 18 AWG
- Strip length
- 7.5 … 9.5 mm / 0.3 … 0.37 inches
- Conductor connection direction to PCB
- 0 °
- Pole number
- 1