218-109/000-012
PCB terminal block; Locking slides; 0.5 mm²; Pin spacing 2.5 mm; 9-pole; CAGE CLAMP®; 0,50 mm²; orange
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Specifications
- Product Group Code
- 0004
Notes
- Variants:
- Other pole numbers || Other colors || Mixed-color PCB connector strips || Direct marking || Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/.
Ratings Per Iec/En
- Ratings per
- IEC/EN 60664-1
- Nominal voltage (III/3)
- 80 V
- Rated impulse voltage (III/3)
- 2.5 kV
- Rated voltage (III/2)
- 160 V
- Rated impulse voltage (III/2)
- 2.5 kV
- Nominal voltage (II/2)
- 320 V
- Rated surge voltage (II/2)
- 2.5 kV
- Rated current
- 6 A
- Legend (ratings)
- (III / 2) ≙ Overvoltage category III / Pollution degree 2
Ratings Per Ul 1059
- Approvals per
- UL 1059
- Rated voltage UL (Use Group B)
- 150 V
- Rated current UL (Use Group B)
- 4 A
Ratings Per Csa
- Approvals per
- CSA
- Rated voltage CSA (Use Group B)
- 150 V
- Rated current CSA (Use Group B)
- 4 A
Connection 1
- Connection technology
- CAGE CLAMP®
- Actuation type
- Slider
- Solid conductor
- 0.08 … 0.5 mm² / 28 … 20 AWG
- Fine-stranded conductor
- 0.08 … 0.5 mm² / 28 … 20 AWG
- Fine-stranded conductor; with insulated ferrule
- 0.25 mm²
- Fine-stranded conductor; with uninsulated ferrule
- 0.25 mm²
- Note (conductor cross-section)
- Terminating 0.75 mm²/18 AWG conductors is possible; however insulation diameter allows only every other clamping unit to be terminated with this conductor size.
- Strip length
- 5 … 6 mm / 0.2 … 0.24 inches
- Conductor connection direction to PCB
- 40 °
- Pole number
- 9
Physical Data
- Pin spacing
- 2.5 mm / 0.098 inches
- Width
- 24 mm / 0.945 inches
- Height
- 10.9 mm / 0.429 inches
- Height from the surface
- 8.1 mm / 0.319 inches
- Depth
- 13 mm / 0.512 inches
- Solder pin length
- 2.8 mm
- Solder pin dimensions
- 0.5 x 0.75 mm
- Drilled hole diameter with tolerance
- 1.1 (+0.1) mm
Plug-In Connection
- Plugging without loss of pin spacing
- No
Pcb Contact
- PCB contact
- THT
- Solder pin arrangement
- Over the entire terminal strip (in-line)
- Number of solder pins per potential
- 2
Material Data
- Note (material data)
- Information on material specifications can be found here
- Color
- Orange
- Material group
- I
- Insulation material
- Polyamide (PA66)
- Flammability class per UL94
- V0
- Clamping spring material
- Chrome-nickel spring steel (CrNi)
- Contact material
- Electrolytic copper (ECu)
- Contact plating
- Tin
- Fire load
- 0.039 MJ
- Weight
- 2.977 g
Environmental Requirements
- Limit temperature range
- -60 … +105 °C
Commercial Data
- Packaging type
- Box
- GTIN
- 4044918877848