Wago
224-201
Fixture connector; 1-pole (1x solid stranded or fine-stranded to 1x solid stranded or fine-stranded); gray
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
€0.72
1
Payment methods:
A total of 8,711 Parts In-Stock from 18 Distributors
Product Conditions:
Additional Information
- Part Number
- 224-201
- UPC
- 4044918818407
- Tariff Code
- 85369010000
- ETIM
- Group Code : EG000047
- Group Description : Installation, isolation and connection material
- Class Description : Terminal for luminaire
- Class Code : EC000447
- Version : 7
Ratings Per Iec/En
- Ratings per
- EN 60664
- Nominal voltage (II/2)
- 400 V
- Rated surge voltage (II/2)
- 4 kV
- Rated current
- 24 A
- Legend (ratings)
- (II / 2) ≙ Overvoltage category II / Pollution degree 2
Physical Data
- Width
- 8 mm / 0.315 inches
- Height
- 15.5 mm / 0.61 inches
- Depth
- 42 mm / 1.654 inches
Material Data
- Note (material data)
- <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
- Color
- Gray
- Fire load
- 0.116 MJ
- Weight
- 4.600 g
Specifications
- Product Group Code
- 0007
Commercial Data
- Packaging type
- Box
- Country of origin
- CH
- GTIN
- 4044918818407
- Customs tariff number
- 85369010000
Notes
- Safety information
- In grounded power lines
Connection 1
- Connection technology
- CAGE CLAMP®
- Actuation type
- Push-in
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
- Solid conductor
- 0.5 … 2.5 mm² / 20 … 16 AWG
- Fine-stranded conductor
- 0.5 … 2.5 mm² / 20 … 16 AWG
- Strip length
- 9 … 11 mm / 0.35 … 0.43 inches
- Wiring direction
- Side-entry wiring