Wago
2606-1101/000-016
PCB terminal block; lever; 6 mm²; Pin spacing 7.5 mm; 1-pole; Push-in CAGE CLAMP®; special version; 6,00 mm²; green-yellow
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Pcb Contact
- PCB contact
- THT
- Solder pin arrangement
- Over the entire terminal strip (in-line)
- Number of solder pins per potential
- 2
Ratings Per Iec/En
- Ratings per
- IEC/EN 60664-1
- Nominal voltage (III/3)
- 1000 V
- Rated impulse voltage (III/3)
- 8 kV
- Rated voltage (III/2)
- 1000 V
- Rated impulse voltage (III/2)
- 8 kV
- Nominal voltage (II/2)
- 1000 V
- Rated surge voltage (II/2)
- 8 kV
- Rated current
- 41 A
- Legend (ratings)
- (III / 2) ≙ Overvoltage category III / Pollution degree 2
Environmental Requirements
- Limit temperature range
- -60 … +105 °C
- Processing temperature
- -35 … +60 °C
- Continuous operating temperature
- -60 … +105 °C
Physical Data
- Pin spacing
- 7.5 mm / 0.295 inches
- Width
- 10.35 mm / 0.407 inches
- Height
- 28 mm / 1.102 inches
- Height from the surface
- 24 mm / 0.945 inches
- Depth
- 24.3 mm / 0.957 inches
- Solder pin length
- 4 mm
- Solder pin dimensions
- 1.5 x 1.2 mm
- Drilled hole diameter with tolerance
- 2 (+0.1) mm
Material Data
- Note (material data)
- Information on material specifications can be found here
- Color
- Green-yellow
- Material group
- I
- Insulation material
- Polyamide (PA66)
- Flammability class per UL94
- V0
- Clamping spring material
- Chrome-nickel spring steel (CrNi)
- Contact material
- Electrolytic copper (ECu)
- Contact plating
- Tin
- Fire load
- 0.052 MJ
- Actuator color
- Orange
- Weight
- 4.477 g
Specifications
- Product Group Code
- 0004
Commercial Data
- Country of origin
- PL
- GTIN
- 4066966257137
- Customs tariff number
- 85369010000
Notes
- Note
- The inherent stability of a single-pole PCB terminal block is less than that of a multi-pole terminal strip. The customer must therefore ensure that these terminal blocks are protected against excessive mechanical stress (e.g., torsional or bending stress), both when connecting the conductor and during subsequent use, for example by providing additional support, shortly holding the connected conductor and appropriate actuation instructions.
- Variants:
- Other pole numbers || Direct marking || Other colors || Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/.
Ratings Per Csa
- Approvals per
- CSA
- Rated voltage CSA (Use Group B)
- 600 V
- Rated current CSA (Use Group B)
- 31 A
- Rated voltage CSA (Use Group C)
- 1000 V
- Rated current CSA (Use Group C)
- 31 A
Connection 1
- Connection technology
- Push-in CAGE CLAMP®
- Actuation type
- Lever
- Solid conductor
- 0.2 … 10 mm² / 24 … 8 AWG
- Fine-stranded conductor
- 0.2 … 10 mm² / 24 … 8 AWG
- Fine-stranded conductor; with insulated ferrule
- 0.25 … 6 mm²
- Fine-stranded conductor; with uninsulated ferrule
- 0.25 … 6 mm²
- Fine-stranded conductor; with twin ferrule
- 0.25 … 2.5 mm²
- Strip length
- 11 … 13 mm / 0.43 … 0.51 inches
- Conductor connection direction to PCB
- 0 °
- Pole number
- 1
Ratings Per Ul 1059
- Approvals per
- UL 1059
- Rated voltage UL (Use Group B)
- 600 V
- Rated current UL (Use Group B)
- 31 A
- Rated voltage UL (Use Group C)
- 600 V
- Rated current UL (Use Group C)
- 31 A
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther