280-565

Additional Information

Part Number

280-565

UPC

4044918890212

Tariff Code

85369010000

ETIM

Group Code : EG000012

Group Description : Terminal blocks

Class Description : Sensor/actuator terminal block

Class Code : EC000900

Version : 7

Ratings Per Iec/En

Ratings (note)

Electrical ratings are given by the fuse plug or empty component plug housing.

Nominal voltage (III/3)

125 V

Rated current

5 A

Legend (ratings)

(III / 3) ≙ Overvoltage category III / Pollution degree 3

Ratings Per Iec/En 2

Rated voltage (III/3) 2

250 V

Rated current 2

6.3 A

Environmental Requirements

Processing temperature

-35 … +85 °C

Continuous operating temperature

-60 … +105 °C

Physical Data

Width

5 mm / 0.197 inches

Height

80 mm / 3.15 inches

Depth from upper-edge of DIN-rail

55.5 mm / 2.185 inches

Material Data

Note (material data)

<a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>

Color

Gray

Material group

I

Insulation material

Polyamide (PA66)

Flammability class per UL94

V0

Fire load

0.297 MJ

Weight

9.814 g

Mechanical Data

Design

Angled

Mounting type

DIN-35 rail

Marking level

Center marking

Specifications

Product Group Code

0001

Commercial Data

Packaging type

Box

Country of origin

DE

GTIN

4044918890212

Customs tariff number

85369010000

Power Loss

Power loss, per pole (potential)

0.0333 W

Rated current IN for specified power loss

5 A

Resistance value for specified, current-dependent power loss

0.00133 Ω

Connection 1

Connection technology

CAGE CLAMP®

Actuation type

Operating tool

Connectable conductor materials

Copper || Aluminum

Connectable conductor materials (note)

Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A

Solid conductor

0.08 … 2.5 mm² / 28 … 12 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 12 AWG

Note (conductor cross-section)

12 AWG: THHN, THWN

Strip length

8 … 9 mm / 0.31 … 0.35 inches

Wiring direction

Front-entry wiring