Wago
281-512/281-418
Fuse plug; with pull-tab; for miniature metric fuses 5 x 20 mm and 5 x 25 mm; with blown fuse indication by neon lamp; 120 V; 6 mm wide; gray
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Additional Information
- Part Number
- 281-512/281-418
- UPC
- 4050821276258
- Tariff Code
- 85366990990
- ETIM
- Group Code : EG000012
- Group Description : Terminal blocks
- Class Description : Component plug terminal block
- Class Code : EC002018
- Version : 7
Ratings Per Iec/En
- Ratings (note)
- Electrical ratings are given by the fuse and blown fuse indication.
- Nominal voltage (III/3)
- 250 V
- Rated current
- 6.3 A
- Note (rated current)
- Leakage current in case of a blown fuse: Neon lamp < 0.4 mA
- Operation status indicator
- None
Environmental Requirements
- Continuous operating temperature
- -60 … +105 °C
Physical Data
- Width
- 6 mm / 0.236 inches
Material Data
- Note (material data)
- <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
- Color
- Gray
- Material group
- I
- Insulation material
- Polyamide (PA66)
- Flammability class per UL94
- V0
- Fire load
- 0.082 MJ
- Weight
- 6.351 g
Mechanical Data
- Marking level
- Center marking
General
- Voltage type 1
- AC/DC
- Fuse type
- Cylindrical fuse; 5 x 20 mm and 5 x 25 mm
Specifications
- Product Group Code
- 0001
Commercial Data
- Packaging type
- Box
- Country of origin
- CN
- GTIN
- 4050821276258
- Customs tariff number
- 85366990990
Power Loss
- Power loss (max.) Pl (max.) (note)
- When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers.