704-9024

System cable; for Siemens ET200SP; 8 digital inputs or outputs; Length: 3 m; Conductor cross-section: 0.14 mm²

System cable; for Siemens ET200SP; 8 digital inputs or outputs; Length: 1 m; Conductor cross-section: 0.14 mm²

System cable; for Siemens ET200SP; 8 digital inputs or outputs; Length: 2 m; Conductor cross-section: 0.14 mm²

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

16-channel digital output; 24 VDC; 0.5 A

WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint

Plug; 3-pole; Cod. P; 4,00 mm²; red

Shield connecting plate; 3-pole; for sockets and plugs; silver-colored

3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; light gray