767-5803
8-channel digital input/output; 24 VDC; 0.5 A; 8 x M12
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Environmental Requirements
- Ambient temperature (operation)
- -25 … +60 °C
- Ambient temperature (storage)
- -40 … +85 °C
- Protection type
- IP67
- Protection class
- III
- Operating altitude
- −1000 … 2000 m; Air pressure: 1080 … 795 hPa
- Relative humidity (without condensation)
- 95 %
- Vibration resistance
- 5g per IEC 60068-2-6
- Shock resistance
- Short-term: 50g/11 ms/half-sine per IEC 60068-2-27; Long-term: 30g/6 ms/half-sine per IEC 60068-2-29
- EMC immunity to interference
- Per EN 61000-6-2
- EMC emission of interference
- Per EN 61000-6-4
- Permissible H2S contaminant concentration at a relative humidity 75 %
- 0.1 ppm
- Permissible SO2 contaminant concentration at a relative humidity 75 %
- 0.5 ppm
Connection Data
- Connection technology: inputs/outputs
- 8 x M12 socket; 4-pole; A-coded
- Connection technology: field supply
- 1 x M12 plug; 4-pole; A-coded; 1 x M12 socket; 4-pole; A-coded
- Connection technology: system supply
- 1 x M12 socket; 4-pole; A-coded; 1 x M12 plug; 4-pole; A-coded
- Connection technology: system bus
- 1 x M12 socket, 5-pole, B-coded, shielded; 1 x M12 plug, 5-pole, B-coded, shielded
- Connection requirement (permissible cable length)
- 30 m
- Connection requirement (permissible cable type)
- Digital inputs/outputs: unshielded
Physical Data
- Width
- 50 mm / 1.969 inches
- Height
- 35.7 mm / 1.406 inches
- Depth
- 170 mm / 6.693 inches
Material Data
- Color
- Light gray
- Housing material
- Polyamide (PA), Makrolon (address switch cover), flammability per UL94-V0, halogen/silicon-free
- Fire load
- 0.009 MJ
- Weight
- 366.500 g
- Conformity marking
- CE
- Encapsulation
- Polyurethane (PUR), halogen/silicon-free
Technical Data
- Number of digital inputs
- 8
- Number of digital outputs
- 8
- Number of configurable digital inputs/outputs
- 8
- Number of counters
- 2
- Total number of channels (module)
- 8
- Signal type
- Voltage
- Signal type (voltage)
- 24 VDC
- Counter type
- Event/peak-time counter, pulse duration
- Counting/switching frequency
- 0 Hz … 1 kHz
- Sensor connection
- 8 x (2-wire, 3-wire)
- Actuator connection
- 8 x (2-wire, 3-wire)
- Input characteristic
- High-side switching || Type 2, per IEC 61131-2
- Input filter (digital)
- 0.1 ms || 0.5 ms || 3 ms || 15 ms || 20 ms
- Input filter
- Hardware: ≤ 60 µs; Software: parameterizable
- Input current per channel for signal (0) max.
- 2.7 mA
- Input current per channel for signal (1) typ.
- 7 mA
- Input current per channel for signal (1) min.
- 6.8 mA
- Input current per channel for signal (1) max.
- 7.1000000000000005 mA
- Output characteristic
- High-side switching
- Output current per channel
- 0.5 A
- Output current (module)
- 4 A
- Output current
- Short-circuit/overload-protected
- Leakage current in OFF state
- 5 µA
- Switching frequency (max.)
- 500 Hz; Inductive load
- Switching frequency (max.) (2)
- 20 Hz; Resistive load
- Switching frequency (max.) (3)
- 500 Hz; Lamp load
- Load type
- Resistive, inductive, lamp load
- Voltage range for signal (0)
- −3 … +5 VDC
- Voltage range for signal (1)
- 11 … 30 VDC
- Load type of switching frequency
- Inductive load
- Process data width
- Depends on operating mode
- Parameterizable functions
- I/O diagnostics (per module): Short circuit/overload (sensor/actuator supply); Undervoltage (ULS + UA) || I/O diagnostics (per channel): Overtemperature || Online simulation (per module): Diagnostics || Online simulation (per channel): Lock/Unlock; Simulation value: 0/1; Diagnostics || Operating mode (per module): DO module/DI module/DIO module/DIO module + 1 counter/DIO module + 2 counters || Counter: Count direction, start/limit value switching output, gate time || Input filter (per channel): 0.1/ 0.5/ 3 /15 /20 ms/ Filter "Off" || Inversion (per channel): On/Off || Substitute value (per channel): 0/1 || Substitute value strategy (per channel): Switch substitute value/Hold last value || Manual mode (per channel): On/Off || Manual mode value (by channel): 0/1
- Protection
- Reverse voltage protection for ULS + Uo; Short circuit protection for sensor/actuator supply
- Output resistance
- 0.4 Ω
- Supply voltage (system and sensor)
- 24 VDC(-25 … +30 %); Logic and sensors (ULS)
- Current consumption (system and sensor)
- 45 mA
- System and sensor power consumption (note)
- Logic component only
- Supply voltage (field)
- 24 VDC (-25 … +30 %); Actuators (UA)
- Current consumption, field supply (module with no external load)
- 75 mA
- Isolation
- 500 V supply/system bus
- Indicators
- LED (F) red: Error status; LED (SB) green/red/orange: System bus status; LED (ULS, UA) green: Power supply status; LED (0 … 7) yellow/red: Status/diagnostics DI/DO 1 … DI/DO 8; Non-retentive displays
- Current carrying capacity (supply connections)
- 8 A
- Drop-out time from “1” to “0”
- Typ. 40 µs (resistive load)
- Connection of 2-wire BEROs
- Admissible closed current: 1.5 mA (max.)
- Rise time from “0” to “1”
- Typ. 40 µs (resistive load)
- Output operation
- Non-retentive
- Protection against reverse voltages
- 0.5 A
- Voltage drop against UA
- 0.2
- S-bus (system bus) disruption
- 0 V status
Specifications
- Product Group Code
- 0015
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4050821333326
- Customs tariff number
- 85389091890