773-106
PUSH WIRE® connector for junction boxes; for solid and stranded conductors; max. 2.5 mm²; 6-conductor; transparent housing; violet cover; Surrounding air temperature: max 60°C; 2,50 mm²; multicoloured
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Ratings Per Iec/En
- Ratings per
- IEC/EN 60664-1
- Nominal voltage (II/2)
- 400 V
- Rated surge voltage (II/2)
- 4 kV
- Rated current
- 24 A
- Legend (ratings)
- (II / 2) ≙ Overvoltage category II / Pollution degree 2
Environmental Requirements
- Continuous operating temperature
- 105 °C
Physical Data
- Width
- 18.8 mm / 0.74 inches
- Height
- 13.1 mm / 0.516 inches
- Depth
- 19.5 mm / 0.768 inches
Material Data
- Note (material data)
- <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
- Color
- Multicoloured
- Cover color
- Violet
- Flammability class per UL94
- V2
- Fire load
- 0.076 MJ
- Weight
- 3.550 g
Specifications
- Product Group Code
- 0007
Commercial Data
- Packaging type
- Box
- Country of origin
- CN
- GTIN
- 4044918397681
- Customs tariff number
- 85369010000
Notes
- Safety information
- In grounded power lines
Connection 1
- Connection technology
- PUSH WIRE®
- Actuation type
- Push-in
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
- Solid conductor
- 0.75 … 2.5 mm² / 18 … 12 AWG
- Stranded conductor
- 1.5 … 2.5 mm² / 16 … 12 AWG
- Note (conductor cross-section)
- When using conductors of the same diameter, 0.75 mm²/18 AWG cross-section is also possible.
- Strip length
- 12 mm / 0.47 inches
- Wiring direction
- Side-entry wiring