Wago

787-1014/072-000

DC/DC Converter; 72 VDC input voltage; 24 VDC output voltage; 2 A output current
787-1014/072-000
787-1014/072-000
  • Get up to 90 days payment terms from 500+ suppliers
  • Reselling discounts up to 40%!
Sign-Up
Send request for price
1
Payment methods:

Safety And Protection

Isolation voltage (pri.-sec.)
DC 4.242 kV
Protection class
II
Protection type
IP20; per EN 60529
Resistance to reverse feed
≤ DC 35 V
Overvoltage category
II
Pollution degree
2
Transient suppression (primary)
Varistor
Overvoltage protection; secondary
Internal protective circuit || ≤ 40 VDC (in the event of a fault)
Short-circuit-protected
Yes
Open-circuit-proof
Yes
Parallel operation
No
Series operation
Yes
MTBF
> 500,000 h (per IEC 61709)

Environmental Requirements

Ambient temperature (operation)
-40 … +70 °C
Ambient temperature (storage)
-40 … +85 °C
Relative humidity
5 … 96 % (Coated PCB)
Derating
-1.5 %/K (> 55 °C)
Resistance to shock and vibration
Category 1, Class B (per EN 61373:2010)

Connection Data

Connection type 1
Input/output
Connection technology
CAGE CLAMP®
WAGO connector
WAGO 740 Series
Solid conductor
0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor
0.08 … 2.5 mm² / 28 … 12 AWG
Strip length
6 … 7 mm / 0.24 … 0.28 inches

Signaling And Communication

Signaling
1 x Status indication LED (green)
Operation status indicator
Green LED (Uo)

Physical Data

Width
72 mm / 2.835 inches
Height
89 mm / 3.504 inches
Depth
59 mm / 2.323 inches
Depth from upper-edge of DIN-rail
55 mm / 2.165 inches

Material Data

Flammability class per UL94
V0
Fire load
0.120 MJ
Weight
250.000 g

Input

Nominal input voltage Ui nom
DC 72 V
Input voltage range
DC 40 … 90 V
Nominal mains frequency range
0 Hz
Input current Ii
≤ 0.79 A (72 VDC)
Discharge current
≤ 1 mA
Inrush current
≤ 30 A (NTC)
Mains failure hold-up time
≥ 8 ms (72 VDC)

Output

Nominal output voltage Uo nom
DC 24 V (SELV)
Default setting
DC 24 V
Nominal output current Io nom
2 A (24 VDC); 1.6 A (in any mounting position)
Nominal output power
48 W
Deviation
≤ 1 %
Residual ripple
≤ 100 mV (peak-to-peak)
Current limitation
1.1 x Io nom (typ.)
Overload behavior
Constant current

Standards And Specifications

Conformity marking
CE
Standards/specifications
EN 61010-1 || EN 61010-2-201 || EN 61204-3 || EN 50121-3-2 || DNV
Standards/specifications (pending)
EN 50125 || UL 60950 || UL 508

Mechanical Data

Mounting type
DIN-35 rail

Specifications

Product Group Code
0006

Commercial Data

Packaging type
Box
Country of origin
DE
GTIN
4055143256544
Customs tariff number
85044083900

Efficiency/Power Losses

Power loss Pl
≤ 2 W (72 VDC; no load); ≤ 9 W (72 VDC; nominal load)
Power loss (max.) Pl (max.)
10.5 W (40 VDC / 24 VDC; 2 A)
Efficiency (typ.)
84 %

<B>Circuit Protection</B>

Internal fuse
T 4 A / 125 VDC
Backup fusing (recommended)
Circuit breaker: 6 A, 10 A; Tripping characteristic: B or C

Related products

210-831

210-831

Wago
Marking strips; on reel; 2.3 mm wide; plain; Self-adhesive; white
210-832

210-832

Wago
Marking strips; on reel; 3 mm wide; plain; Self-adhesive; white
210-720

210-720

Wago
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured
283-901

283-901

Wago
2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray
285-197

285-197

Wago
POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow
294-4002

294-4002

Wago
Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white
734-126

734-126

Wago
Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray
210-333/600-078

210-333/600-078

Wago
Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
231-673

231-673

Wago
Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white
739-309

739-309

Wago
PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray
284-624

284-624

Wago
Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue
787-2861/108-020

787-2861/108-020

Wago
Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact
231-635/017-000

231-635/017-000

Wago
Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange
736-604

736-604

Wago
Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange
236-424

236-424

Wago
PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray
750-1504

750-1504

Wago
16-channel digital output; 24 VDC; 0.5 A
2852-7115

2852-7115

Wago
WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint
770-1313

770-1313

Wago
Plug; 3-pole; Cod. P; 4,00 mm²; red
890-523

890-523

Wago
Shield connecting plate; 3-pole; for sockets and plugs; silver-colored
281-998

281-998

Wago
3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; light gray

Other Categories

ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther