787-1692
Switched-mode power supply; Classic; 1-phase; Output voltage: 30.5 VDC; 3 A output current; DC-OK LED; 2,50 mm²
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Safety And Protection
- Isolation voltage (pri.-sec.)
- DC 4.242 kV
- Isolation voltage (pri.-PE)
- DC 2.2 kV
- Isolation voltage (sec.-PE)
- DC 0.7 kV
- Protection class
- II
- Protection type
- IP20; per EN 60529
- Resistance to reverse feed
- ≤ DC 63 V
- Overvoltage category
- II
- Pollution degree
- 2
- Transient suppression (primary)
- Varistor
- Overvoltage protection; secondary
- ≤ 40 VDC (in the event of a fault)
- Short-circuit-protected
- Yes
- Open-circuit-proof
- Yes
- Parallel operation
- No
- Series operation
- Yes
- MTBF
- > 500,000 h (per IEC 61709)
Environmental Requirements
- Ambient temperature (operation)
- -25 … +70 °C
- Ambient temperature (storage)
- -25 … +85 °C
- Relative humidity
- 5 … 96 % (no condensation permissible)
- Derating
- -3 %/K > 50 °C
Connection Data
- Connection type 1
- Input/output
- Connection technology
- CAGE CLAMP®
- WAGO connector
- WAGO 721 Series
- Solid conductor
- 0.08 … 2.5 mm² / 28 … 12 AWG
- Fine-stranded conductor
- 0.08 … 2.5 mm² / 28 AWG … 12 kcmil
- Strip length
- 8 … 9 mm / 0.31 … 0.35 inches
- Note (conductor cross-section)
- 12 AWG: THHN, THWN
Signaling And Communication
- Operation status indicator
- Green LED (DC OK)
Physical Data
- Width
- 52 mm / 2.05 inches
- Height
- 96.5 mm / 3.78 inches
- Depth from upper-edge of DIN-rail
- 13.5 mm / 4.06 inches
Material Data
- Fire load
- 0.000 MJ
- Weight
- 380.000 g
Input
- Phases
- 1
- Nominal input voltage Ui nom
- 1 x AC 100 … 240 V
- Input voltage range
- 1 x AC 85 … 264 V; DC 120 … 372 V
- Nominal mains frequency range
- 47 … 63 Hz; 0 Hz
- Input current Ii
- ≤ 1.81 A (100 VAC); ≤ 0.91 A (230 VAC)
- Inrush current
- ≤ 30 A (NTC)
- Power factor correction (PFC)
- Passive
- Mains failure hold-up time
- ≥ 13 ms (100 VAC); ≥ 100 ms (230 VAC)
Output
- Nominal output voltage Uo nom
- DC 30.5 V (SELV)
- Output voltage range
- DC 29 … 32 V (adjustable)
- Default setting
- DC 30.5 V
- Nominal output current Io nom
- 3 A (AS-i compatible)
- Deviation
- ≤ 1 %
- Load regulation
- ≤ 1 %
- Overload behavior
- Constant current (no shutdown in the event of a permanent overload)
Standards And Specifications
- Standards/specifications
- EN 61558-2-16 || EN 61010-1 || EN 61010-2-201 || EN 60335-1 || EN 61204-3 || EN 61140 || UL 508 || UL 60950 || AS-Interface
Mechanical Data
- Mounting type
- DIN-35 rail
- Mounting position
- Horizontal
Specifications
- Product Group Code
- 0006
Commercial Data
- Country of origin
- DE
- GTIN
- 4066966335330
- Customs tariff number
- 85044083900
Efficiency/Power Losses
- Power loss Pl
- ≤ 2.3 W (no load); ≤ 14 W (nominal load)
- Power loss (max.) Pl (max.)
- 15 W (264 VAC / 30.5 VDC; 3 A)
- Efficiency (typ.)
- 88 %
<B>Circuit Protection</B>
- Internal fuse
- T 4 A / 250 VAC
- Backup fusing (required)
- An external DC fuse is required for the DC input voltage.
- Backup fusing (recommended)
- Circuit breaker: C10 or B16