Wago
787-632
EPSITRON® power supply; single-phase; output voltage 24 VDC; 10 A
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 3 Parts In-Stock from 3 Distributors
Product Conditions:
Additional Information
- Part Number
- 787-632
- UPC
- 4045454435370
- Tariff Code
- 85044082900
- ETIM
- Group Code : EG000017
- Group Description : Low-voltage Industrial Components
- Class Description : DC-power supply
- Class Code : EC002540
- Version : 7
Safety And Protection
- Isolation voltage (pri.-sec.)
- DC 4.242 kV
- Isolation voltage (pri.-PE)
- DC 2.2 kV
- Isolation voltage (sec.-PE)
- DC 0.7 kV
- Protection class
- I
- Protection type
- IP20; per EN 60529
- Resistance to reverse feed
- ≤ DC 33 V
- Pollution degree
- 2
- Transient suppression (primary)
- Varistor
- Overvoltage protection; secondary
- Internal protective circuit || ≤ 33 VDC (in the event of a fault)
- Short-circuit-protected
- Yes
- Open-circuit-proof
- Yes
- Parallel operation
- Yes
- Series operation
- Yes
Environmental Requirements
- Ambient temperature (operation)
- -10 … +70 °C
- Ambient temperature (storage)
- -25 … +85 °C
- Relative humidity
- 30 … 85 % (no condensation permissible)
- Derating
- -3 %/K (> 50 °C)
Connection Data
- Connection type 1
- Input/output
- Connection technology
- CAGE CLAMP®
- WAGO connector
- WAGO 231 Series
- Solid conductor
- 0.08 … 2.5 mm² / 28 … 12 AWG
- Fine-stranded conductor
- 0.08 … 2.5 mm² / 28 … 12 AWG
- Strip length
- 8 … 9 mm / 0.31 … 0.35 inches
- Note (conductor cross-section)
- 12 AWG: THHN, THWN
Signaling And Communication
- Operation status indicator
- Green LED (24 V OK) || Red LED (overload)
Physical Data
- Width
- 115 mm / 4.528 inches
- Height from upper-edge of DIN-rail
- 87 mm / 3.425 inches
- Depth from upper-edge of DIN-rail
- 140 mm / 5.512 inches
Material Data
- Fire load
- 10.100 MJ
- Weight
- 950.000 g
Input
- Phases
- 1
- Nominal input voltage Ui nom
- 1 x AC 110 … 240 V; DC 100 … 300 V
- Input voltage range
- 1 x AC 85 … 264 V; DC 90 … 350 V
- Input voltage derating
- -2 %/V (< 97 VAC)
- Nominal mains frequency range
- 50 … 60 Hz; 0 Hz
- Input current Ii
- ≤ 2 A (230 VAC)
- Discharge current
- ≤ 1 mA
- Inrush current
- ≤ 60 A
- Power factor correction (PFC)
- Passive
- Mains failure hold-up time
- ≥ 20 ms (230 VAC)
Output
- Nominal output voltage Uo nom
- DC 24 V (SELV)
- Output voltage range
- DC 22.8 … 28.8 V (adjustable)
- Default setting
- DC 24 V
- Nominal output current Io nom
- 10 A (24 VDC)
- Deviation
- ≤ 3 %
- Residual ripple
- ≤ 200 mV (peak-to-peak)
- Current limitation
- 1.2 x Io nom (typ.)
- Overload behavior
- Constant current
Standards And Specifications
- Conformity marking
- CE
- Standards/specifications
- EN 60950-1 || EN 61204-3 || UL 60950 || UL 508 || DNV
Mechanical Data
- Mounting type
- DIN-35 rail
Specifications
- Product Group Code
- 0006
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4045454435370
- Customs tariff number
- 85044083900
Efficiency/Power Losses
- Power loss Pl
- ≤ 26.9 W
- Power loss (max.) Pl (max.)
- 32.6 W (90 VAC / 24 VDC; 10 A)
- Efficiency (typ.)
- 88 %
<B>Circuit Protection</B>
- Internal fuse
- T 6.3 A / 250 VAC
- Backup fusing (required)
- An external DC fuse is required for the DC input voltage.
- Backup fusing (recommended)
- Circuit breaker: C10 or B16
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther