Wago
857-153
Basic relay; Nominal input voltage: 24 VDC; 1 changeover contact; Limiting continuous current: 6 A; with gold contacts; Module width: 5 mm; Module height: 15 mm
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 11 Parts In-Stock from 8 Distributors
Product Conditions:
Safety And Protection
- Dielectric strength (control/load circuit) (AC, 1 min)
- 4 kVrms
- Dielectric strength (open contact) (AC, 1 min)
- 1 kVrms
- Protection type
- IP20
Load Circuit
- Number of changeover/switchover contacts
- 1
- Contact material (relay)
- AgNi + Au
- Limiting continuous current
- 6 A
- Inrush current (resistive) max.
- (AC) 20 A / 0.02 s
- Switching voltage (max.)
- AC 250 V
- Switching power (resistive) max.
- AC 1500 VA; DC (see load limit curve)
- Switching capacity
- AC-15: 3 A / AC 250 V; DC-13: 2 A / DC 24 V
- Recommended minimum load
- 1 V / 1 mA / 1 mW
- Pull-in time (typ.)
- 8 ms
- Drop-out time (typ.)
- 4 ms
- Bounce time (typ.)
- 3.5 ms
- Electrical life (NO; resistive load; 23 °C)
- 50 x 10³ switching operations
- Mechanical life
- 5 x 10⁶ switching operations
- Switching frequency with/without load (max.)
- 6 min-1 / 180 min-1
Environmental Requirements
- Ambient temperature (operation at UN)
- -40 … +85 °C
- Ambient temperature (storage)
- -40 … +85 °C
- Relative humidity
- 5 … 85 % (no condensation permissible)
- Operating altitude (max.)
- 2000 m
Control Circuit
- Nominal input voltage UN
- DC 24 V
Physical Data
- Width
- 5 mm / 0.197 inches
- Height from the surface
- 15 mm / 0.591 inches
- Depth
- 28 mm / 1.09 inches
Material Data
- Fire load
- 0.071 MJ
- Weight
- 6.435 g
Standards And Specifications
- Standards/specifications
- EN 61810-1 || EN 61373 || VDE || UR
Mechanical Data
- Mounting type
- Pluggable module
Specifications
- Product Group Code
- 0006
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4045454551018
- Customs tariff number
- 85364900990
Notes
- Note
- To prevent damaging the gold layer, 30 V switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life.To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.