858-518
Relay module; Nominal input voltage: 230 VAC; 4 changeover contacts; Limiting continuous current: 5 A; with gold contacts; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Basic Relay
- WAGO Basic Relay
- 858-153
Safety And Protection
- Rated voltage
- 300 V
- Rated surge voltage
- 2.5 kV
- Overvoltage category
- II
- Pollution degree
- 2
- Dielectric strength (control/load circuit) (AC, 1 min)
- 1.5 kVrms
- Dielectric strength (open contact) (AC, 1 min)
- 1 kVrms
- Dielectric strength (load/load circuit) (AC, 1 min)
- 1.5 kVrms
- Insulation type (control/load circuit)
- Basic insulation
- Insulation type (open contact)
- Functional insulation
- Insulation type (load/load circuit)
- Basic insulation
- Insulation type (adjacent devices)
- Reinforced insulation (safe isolation)
- Protection type
- IP20
Load Circuit
- Number of changeover/switchover contacts
- 4
- Contact material (relay)
- AgCe + Au
- Limiting continuous current
- 5 A
- Inrush current (resistive) max.
- (AC) 15 A / 4 s
- Switching voltage (max.)
- AC 250 V
- Switching power (resistive) max.
- AC 1250 VA; DC (see load limit curve)
- Switching capacity
- AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V
- Recommended minimum load
- 5 V / 1 mA / 50 mW
- Pull-in time (typ.)
- 25 ms
- Drop-out time (typ.)
- 35 ms
- Bounce time (typ.)
- 4 ms
- Electrical life (NO; resistive load; 23 °C)
- 100 x 10³ switching operations
- Mechanical life
- 20 x 10⁶ switching operations
Environmental Requirements
- Ambient temperature (operation at UN)
- -25 … +70 °C
- Ambient temperature (storage)
- -40 … +70 °C
- Processing temperature
- -25 … +50 °C
- Temperature range of connection cable
- ≥ (Tambient + 25 K)
- Relative humidity
- 5 … 85 %
- Operating altitude (max.)
- 2000 m
Connection Data
- Connection technology
- Push-in CAGE CLAMP®
- Solid conductor
- 0.34 … 1.5 mm² / 22 … 16 AWG
- Fine-stranded conductor
- 0.34 … 1.5 mm² / 22 … 16 AWG
- Strip length
- 9 … 10 mm / 0.35 … 0.39 inches
- Note (conductor cross-section)
- 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG
Control Circuit
- Nominal input voltage UN
- AC 230 V
- Input voltage range
- -20 … +10 %
- Nominal input current at UN
- 9 mA
Physical Data
- Width
- 31 mm / 1.22 inches
- Height
- 97 mm / 3.819 inches
- Depth from upper-edge of DIN-rail
- 73 mm / 2.874 inches
Material Data
- Fire load
- 1.255 MJ
- Weight
- 96.200 g
Standards And Specifications
- Standards/specifications
- EN 61010-2-201 || EN 61810-1 || EN 61373 || UL 508 (max. 50 °C) || DNV
Mechanical Data
- Mounting type
- DIN-35 rail
- Mounting position
- Horizontal (standing/lying); vertical
Specifications
- Product Group Code
- 0006
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4055143568210
- Customs tariff number
- 85364900990
Notes
- Note
- To prevent damaging the gold layer, 30 VDC switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life.
Signaling
- Status indicator
- Red LED || Mechanical