Wago
859-384
Relay module; Nominal input voltage: 48 VDC; 1 changeover contact; with gold contacts; Railway; Red status indicator; Module width: 6 mm; 2,50 mm²; gray
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
€61.96
1
Payment methods:
Product Conditions:
Safety And Protection
- Rated voltage
- 300 V
- Rated surge voltage
- 4 kV
- Overvoltage category
- III
- Pollution degree
- 2
- Dielectric strength (control/load circuit) (AC, 1 min)
- 4 kVrms
- Dielectric strength (open contact) (AC, 1 min)
- 1 kVrms
- Insulation type (adjacent devices)
- Reinforced insulation (safe isolation)
- Protection type
- IP20; in connected state or when using 859-525 end plate
Load Circuit
- Number of changeover/switchover contacts
- 1
- Contact material (relay)
- AgNi + Au
- Limiting continuous current
- 5 A
- Switching voltage (max.)
- AC 250 V
- Switching power (resistive) max.
- AC 1250 VA; DC (see load limit curve)
- Switching capacity
- AC-15: 3 A / AC 250 V; DC-13: 2 A / DC 24 V
- Recommended minimum load
- 1 V / 1 mA / 1 mW
- Pull-in time (typ.)
- 15 ms
- Drop-out time (typ.)
- 25 ms
- Bounce time (typ.)
- 3.5 ms
- Electrical life (NO; resistive load; 23 °C)
- 50 x 10³ switching operations
- Mechanical life
- 5 x 10⁶ switching operations
- Switching frequency with/without load (max.)
- 6 min-1 / 180 min-1
Environmental Requirements
- Ambient temperature (operation at UN)
- -40 … +70 °C
- Ambient temperature (storage)
- -40 … +70 °C
- Processing temperature
- -25 … +50 °C
- Temperature range of connection cable
- ≥ (Tambient + 20 K)
- Relative humidity
- 5 … 95 % (no condensation permissible)
- Operating altitude (max.)
- 2000 m
Connection Data
- Connection technology
- CAGE CLAMP®
- Solid conductor
- 0.08 … 2.5 mm² / 28 … 14 AWG
- Fine-stranded conductor
- 0.08 … 2.5 mm² / 28 … 14 AWG
- Fine-stranded conductor; with insulated ferrule
- 0.08 … 1.5 mm² / 28 … 16 AWG
- Strip length
- 5 … 6 mm / 0.2 … 0.24 inches
Control Circuit
- Nominal input voltage UN
- DC 48 V
- Input voltage range
- -30 … +25 %
- Nominal input current at UN
- 8 mA
Physical Data
- Width
- 6 mm / 0.236 inches
- Height
- 91 mm / 3.583 inches
- Depth from upper-edge of DIN-rail
- 56 mm / 2.205 inches
Material Data
- Color
- Gray
- Fire load
- 0.338 MJ
- Weight
- 23.683 g
Standards And Specifications
- Standards/specifications
- EN 61010-2-201 || EN 61810-1 || EN 61373
Mechanical Data
- Mounting type
- DIN-35 rail
- Mounting position
- Horizontal (standing/lying); vertical
Specifications
- Product Group Code
- 0006
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4045454315849
- Customs tariff number
- 85364900990
Notes
- Note
- To prevent damaging the gold layer, 30 V switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life.To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Signaling
- Status indicator
- Red LED