Weidmuller
0525910000
ZBE 6K SW
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Offer with manufacturer lead time
Ships in:On Request
Best price:
€1.00
Additional Information
- Part Number
- 0525910000
Approvals
- Approvals
- CSA, DEMKOATEX, EAC, IECEXULD
- ROHS
- Conform
Dimensions And Weights
- Width
- 8 mm
- Width (inches)
- 0.315 inch
- Height
- 22.5 mm
- Height (inches)
- 0.886 inch
- Depth
- 19.5 mm
- Depth (inches)
- 0.768 inch
- Net weight
- 10.34 g
Csa Rating Data
- Certificate No. (CSA)
- 12400-237
- Wire cross section max. (CSA)
- 8 AWG
- Wire cross section min. (CSA)
- 22 AWG
Additional Technical Data
- Installation advice
- Busbar, Direct mounting
- Type of mounting
- when screwed in
Material Data
- Material
- Steel
- Insulating material
- PA
- Colour
- black
Classifications
- ETIM 6.0
- EC002848
- ETIM 7.0
- EC002848
- EClass 9.0
- 27-14-11-92
- EClass 9.1
- 27-14-11-92
- EClass 10.0
- 27-14-11-92
- UNSPSC
- 30-21-18-11
System Specifications
- Version
- for busbar 10 x 3 mm
Temperatures
- Operating temperature range
- For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Rating Data Iecex/Atex
- Certificate No. (ATEX)
- DEMKO03ATEX136028U
- Certificate No. (IECEX)
- IECEXULD13.0005U
- Wire cross section max. (ATEX)
- 6 mm²
- Wire cross section max. (IECEX)
- 6 mm²
- Operating temperature range
- For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
- Marking EN 60079-7
- Ex eb II C Gb
- Ex 2014/34/EU label
- II 2 G D
- Safety notice
- Installation instructions:The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.Regarding accessory use, the manufacturer's instructions must be followed. List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
Conductors For Clamping (Rated Connection)
- Clamping screw
- M 4
- Stripping length
- 19 mm
- Tightening torque, min.
- 1.2 Nm
- Type of connection
- Clamping yoke
- Wire connection cross section, finely stranded, max.
- 10 mm²
- Wire connection cross-section, finely stranded, min.
- 1.5 mm²
- Wire connection cross-section, solid core, max.
- 10 mm²
- Wire connection cross-section, solid core, min.
- 1 mm²
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther