1161150000

VSPC 4SL 12VAC EX

1161150000

1161150000

1161150000

1161150000

1161150000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 28.05.2024

Further Details Of Approvals

GOST certificate: GOST-Zertifikat

Protection Ex - Data

ATEX - dust labelling: II 1 D Ex ia IIIC T135 °C …T85 °C Da
ATEX - gas labelling: II 1 G Ex ia IIC T4… T6 Ga
Certificate No. (ATEX): KEMA10ATEX0148X
IECEx - dust labelling: II 1 D Ex ia IIIC T135 °C …T85 °C Da
IECEx - gas labelling: II 1 G Ex ia IIC T4… T6 Ga
Input power, max. P: 3 W
Input voltage, max. U: 19 V
Internal capacity, max. C: < 4 nF
Internal inductance, max. L: 0 µH
Temperature class T4/135°C (-40°C ... +85°C) li: 350 mA
Temperature class T5/100°C (-40 ° C ... +75°C) li: 250 mA
Temperature class T6/85 °C (-40 °C ... +60°C) li: 250 mA

General Data

Colour: Light Blue
Design: Terminal, miscellaneous
Optical function display: No
Protection degree: IP20
Segment: Measurement - Monitoring - Setting
UL 94 flammability rating: V-0
Version: without warning function / function indicator
Protected binary signals: 4

Probability Of Failure

Λges: 45
MTTF: 2,537 Years
PFH in 1*10: 8.9
SFF: 79.3 %
SIL PAPER: SIL PAPER
SIL in compliance with IEC 61508: 2

Approvals

Approvals: CE, CSAEX, EAC, IECEXDEK, KEMAATEX
ROHS: Conform

Insulation Coordination Acc. To En 50178

Pollution severity: 2
Surge voltage category: III

Rated Data Iec / En

Dielectric strength at FG against PE: ≥ 500 V
Discharge current I: 2.5 kA
Input voltage, max. U: 19 V
Lightning test current, I: 2.5 kA
Max. continuous voltage, Uc (AC): 13.2 V
Max. continuous voltage, Uc (DC): 18 V
Number of poles: 2
Overload - failure mode: Modus 2
Protection level U: 250 V
Protection level on output side Wire-PE 1kV/µs, typically: 30 V
Protection level on output side Wire-wire 1 kV/µs, typically: 55 V
Protection level on output side Wire-wire 8/20 µs, typically: 55 V
Protection level, U: 55 V
Pulse-reset capacity: ≤ 20 ms
Rated current I: 300 mA
Rated voltage (AC): 12 V
Rated voltage (DC): 16 V
Requirements category acc. to IEC 61643-21: C1, C2, C3, D1
Signal transmission properties (-3 dB): 2.5 MHz
Signalling contact: No
Standards: IEC 61643-21, IEC 62305, DIN EN 60079-0.2009, DIN EN 60079-11:2007, DIN EN 60079-26:2007, DIN EN 61241-11:2006
Surge current-carrying capacity C1: < 1 kA 8/20 μs
Surge current-carrying capacity C2: 5 kA 8/20 μs
Surge current-carrying capacity C3: 100 A 10/1000 μs
Surge current-carrying capacity D1: 2.5 kA 10/350 μs
Voltage type: AC
Volume resistance: 4.7 Ω

Dimensions And Weights

Width: 17.8 mm
Width (inches): 0.701 inch
Height: 90 mm
Height (inches): 3.543 inch
Depth: 69 mm
Depth (inches): 2.717 inch
Net weight: 49 g

Csa Protection Data

Gas group C: IIB
Gas group D: IIA
Gas groups A, B: IIC
Input voltage, max. U: 19 V
Internal capacity, max. C: 4 nF
Internal inductance, max. L: 0 µH

Connection Data

Type of connection: Pluggable in VSPC BASE

Tender Specification Sheets

Long specification: Surge protection plug for use in connection with the base element VSPC BASE 4SL FG for four wires with a common ground. Two-stage protection circuit in the plug consisting of coarse protection, decoupling resistors and fine protection between the signal wires and the signal ground/ground/earth. Suitable for intrinsically safe powered signal cables EX ia. Mechanical identification of the plug to the base element according to the switching type and rated voltage. Protected plug with coding pin and counter-profile for the base element. Optical identification of the protected plug based on the type of protected switching and the voltage level. It is possible to mark the plug.
Short specification: Surge protection plugs for base element VSPC BASE 4SL FG, coarse and fine common mode voltage protection for four wires with a common signal ground for intrinsically safe signal cables EX ia. Version: 12 V AC

Classifications

ETIM 6.0: EC000943
ETIM 7.0: EC000943
EClass 9.0: 27-13-08-07
EClass 9.1: 27-13-08-07
EClass 10.0: 27-13-08-07
UNSPSC: 30-21-19-21

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Temperatures

Humidity: 5...96 %
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C

Ratings Iecex/Atex/Cul

ATEX certificate: ATEX Certificate
IEC Ex certificate: IECEX Zertifikat
Certificate No. (ATEX): KEMA10ATEX0148X
CUL certificate: cUL Certificate

Related products