Weidmuller
1315240000
UR20-8DO-P
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
€67.05
1
Payment methods:
A total of 1,231 Parts In-Stock from 19 Distributors
Product Conditions:
Additional Information
- Part Number
- 1315240000
General Data
- Air humidity (operation)
- 10% to 95%, non-condensing as per DIN EN 61131-2
- Air humidity (storage)
- 10% to 95%, non-condensing as per DIN EN 61131-2
- Air humidity (transport)
- 10% to 95%, non-condensing as per DIN EN 61131-2
- Air pressure (operation)
- ≥ 795 hPa (height ≤ 2000 m) as per DIN EN 61131-2
- Air pressure (storage)
- 1013 hPa (height 0 m) to 700 hPa (height 3000 m) as per DIN EN 61131-2
- Air pressure (transport)
- 1013 hPa (height 0 m) to 700 hPa (height 3000 m) as per DIN EN 61131-2
- Pollution severity
- 2
- Shock
- 15 g over 11 ms, half sinus wave, acc. to IEC 60068-2-27
- Surge voltage category
- II
- Test voltage
- 500 V
- UL 94 flammability rating
- V-0
- Vibration resistance
- 5 Hz ≤ f ≤ 8.4 Hz: 3.5-mm amplitude as per IEC 60068-2-6, 8.4 Hz ≤ f ≤ 150 Hz: 1 g acceleration as per IEC 60068-2-6
Approvals
- Approvals
- ABS, BURVER, CE, CULUS, CULUSEX, DEMKOATEX, DNV GL, EAC, IECEXULD, KOREANCERT, LLOYDSREG, RINA, WATEXIECEX
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Width
- 11.5 mm
- Width (inches)
- 0.453 inch
- Height
- 120 mm
- Height (inches)
- 4.724 inch
- Depth
- 76 mm
- Depth (inches)
- 2.992 inch
- Mounting dimension - height
- 128 mm
- Net weight
- 87 g
Digital Outputs
- Actuator connection
- 2-wire
- Feedback-free
- Yes
- Individual channel diagnosis
- No
- Inductive load (DC13)
- 0.2 Hz
- Lamp load (12 W)
- 1 kHz
- Max. response time, high
- 100 μs
- Max. response time, low
- 250 μs
- Module diagnosis
- Yes
- Number of digital outputs
- 8
- Output current per channel, max.
- 500 mA
- Output current per module, max.
- 4,000 mA
- Resistive load (min. 47 Ω)
- 1 kHz
- Response time of the protective circuit (current limiting)
- < 100μs
- Short-circuit-proof
- Yes (thermal cut-out)
- Switch-off energy (inductive)
- < 150 mJ / channel
- Type
- Lamp load, Ohmic, Inductive
Connection Data
- Type of connection
- PUSH IN
- Wire connection cross section, finely stranded, max.
- 1.5 mm²
- Wire connection cross-section, finely stranded, min.
- 0.14 mm²
- Wire cross-section, finely stranded, max. (AWG)
- AWG 16
- Wire cross-section, finely stranded, min. (AWG)
- AWG 26
- Wire cross-section, solid, max.
- 1.5 mm²
- Wire cross-section, solid, max. (AWG)
- AWG 16
- Wire cross-section, solid, min.
- 0.14 mm²
- Wire cross-section, solid, min. (AWG)
- AWG 26
Classifications
- ETIM 6.0
- EC001597
- ETIM 7.0
- EC001597
- EClass 9.0
- 27-24-26-02
- EClass 9.1
- 27-24-26-02
- EClass 10.0
- 27-24-26-02
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
System Data
- Diagnostic data
- 1 Bit
- Field bus protocol
- CANopen, DeviceNet, EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET IRT, PROFIBUS DP-V1, POWERLINK
- Galvanic isolation
- 500 V DC between the current paths
- Interface
- u-remote system bus
- Module type
- Digital output module
- Possible connection
- 2-wire
- Process data
- 1 Byte
- Transmission speed of system bus, max.
- 48 Mbit
Temperatures
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -20 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -20 °C ... +60 °C
- Storage temperature
- -40 °C ... +85 °C
Power Supply
- Current consumption from I
- 15 mA + load
- Voltage supply
- 24 V DC +20 %/ -15 %, via the system bus