1351270000

VPU II 3 PV 1000V DC

1351270000

1351270000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 11.06.2024

Additional Information

Part Number: 1351270000

General Data

Colour: black, orange
Design: Installation housing; 3TE, Insta IP 20
Optical function display: green = OK; red = arrester is defective - replace
Protection degree: IP20
Rail: TS 35
UL 94 flammability rating: V-0
Version: without telecomm. contact

Approvals

Approvals: CE, EAC
ROHS: Conform

Insulation Coordination Acc. To En 50178

Pollution severity: 2
Surge voltage category: III

Dimensions And Weights

Width: 53.4 mm
Width (inches): 2.102 inch
Height: 94 mm
Height (inches): 3.701 inch
Depth: 69 mm
Depth (inches): 2.717 inch
Mounting dimension - height: 75 mm
Net weight: 400 g

Connection Data

Type of connection: Screw connection
Stripping length, rated connection: 15 mm
Tightening torque, min.: 2 Nm
Tightening torque, max.: 3 Nm
Clamping range, rated connection: 16 mm²
Clamping range, min.: 2.5 mm²
Clamping range, max.: 35 mm²
Wire cross-section, solid, min.: 2.5 mm²
Wire cross-section, solid, max.: 16 mm²
Wire connection cross-section, finely stranded, min.: 2.5 mm²
Wire connection cross section, finely stranded, max.: 25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 50 mm²
Connection cross-section, stranded, min.: 2.5 mm²
Connection cross-section, stranded, max.: 50 mm²

Tender Specification Sheets

Long specification: Multi-pole surge voltage arrestor according to the requirements of Class II acc. to IEC 50539-11. Consisting of V0 material, the arrestor serves as overvoltage protection in applications acc. to IEC 50539-12 in unearthed PV systems. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. Rated voltage: 1000 VDC In/max (8/20 µs): 20/40 kA, protection level < 4 kV, type: Weidmüller VPU II 3 PV 1000 V/40 kA, Order No. 1351270000 or equivalent
Short specification: Class II arrestor with In/Imax: 20/40 kA suitable for unearthed PV systems. Protection level < 4 kV. Type: Weidmüller VPU II 3 PV 1000 V/40 kA Order No. 1351270000 or equivalent

Classifications

ETIM 6.0: EC000941
ETIM 7.0: EC000941
EClass 9.0: 27-13-08-05
EClass 9.1: 27-13-08-05
EClass 10.0: 27-13-08-05
UNSPSC: 30-21-19-21

Photovoltaic Technical Data

Conditions and requirements: EN 50539-11
Discharge current I: 20 kA
Discharge current, max. (8/20 µs): 40 kA
Maximum continuous operating voltage UCPV mode +/-, -/PE, +/PE: 1,000 V DC
PV system voltage, max. U: 1,000 V
Protection level U: ≤ 4.0 kV
Requirements class: Type II
Short-circuit curent I: 200 A
Standards: EN 50539-11

Temperatures

Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C

Related products