1351620000

VPU I 2 R LCF 280V/25KA

1351620000

1351620000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

£665.00

1

Payment methods:

A total of 1 Part In-Stock from 8 Distributors

Product Conditions:

New

Availability:: 1 pcs.
In-stock

£665.00for 1 pc..

Updated at 28.09.2024

Offer with manufacturer lead time

Ships in:On Request

Best price:

€341.03

Additional Information

Part Number: 1351620000

General Data

Colour: black, orange
Design: Installation housing; 4TE, Insta IP 20
Optical function display: green = OK; red = arrester is defective - replace
Protection degree: IP20
Rail: TS 35
Segment: Power distribution
Suitable for: Count-in installation (leakage current free)
UL 94 flammability rating: V-0
Version: with remote contact, Leakage-current-free

Approvals

Approvals: CE, EAC, OEVE
ROHS: Conform

Insulation Coordination Acc. To En 50178

Pollution severity: 2
Surge voltage category: IV

Rated Data Iec / En

Discharge current I: 25 kA
Discharge current, I: 25 kA
Energy coordination (≤10 m): Type I, Type II, Type III
Follow-on current extinguishing capability I: Not available due for technical reasons
Frequency range, max.: 60 Hz
Frequency range, min.: 50 Hz
Fuse: 250 A gL (if back up fuse > 250 A)
Leakage current at U: 1 µA
Lightning test current I: 25 kA
Low voltage network: Single-phase
Max. continuous voltage, Uc (AC): 280 V
Number of poles: 2
Protection level U: ≤ 1.6 kV
Rated load current I: 125 A
Rated voltage (AC): 230 V
Requirements category acc. to IEC 61643-11: Type I, Type II
Requirements class, acc. to EN 61643-11: T1, T2
Response time: ≤ 100 ns
Short-circuit current rating I: 25 kA
Signalling contact: 250 V 1A 1CO
Standards: IEC61643-11, EN61643-11
Suitable for: Count-in installation (leakage current free)
Temporary surge voltage (over-voltage) - TOV: 438 V
Voltage type: AC

Dimensions And Weights

Width: 71.2 mm
Width (inches): 2.803 inch
Height: 106 mm
Height (inches): 4.173 inch
Depth: 69 mm
Depth (inches): 2.717 inch
Mounting dimension - height: 75 mm
Net weight: 714 g

Connection Data

Type of connection: Screw connection
Stripping length, rated connection: 15 mm
Tightening torque, min.: 2 Nm
Tightening torque, max.: 3 Nm
Clamping range, rated connection: 16 mm²
Clamping range, min.: 4 mm²
Clamping range, max.: 35 mm²
Wire cross-section, solid, min.: 2.5 mm²
Wire cross-section, solid, max.: 16 mm²
Wire connection cross-section, finely stranded, min.: 2.5 mm²
Wire connection cross section, finely stranded, max.: 25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 50 mm²
Connection cross-section, stranded, min.: 2.5 mm²
Connection cross-section, stranded, max.: 50 mm²

Tender Specification Sheets

Long specification: Multi-pin lightning arrestor according to the requirements of Class I in accordance with IEC 61643-11, EN61643-11:2013. On interface transition from 0 to 1 (acc. to IEC 1312-1), the arrestor serves as lightning protection providing equipotential bonding and is used in applications in accordance with IEC 61643-12. The use of a non-blow-out sparkover gap, in combination with a high-performance varistor, satisfies the inspection requirements for Class I surge protection systems in accordance with the VDEW (Association of German Power Stations) directive. The arrestor is installed in the vicinity of the power supply for the equipment that needs protection, in a standard installation/electrical distribution enclosure. The VPU I 2 R LCF 280 V/25 kA is used in the single-phase mains network. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. The functional state is also displayed by a voltage-free signalling contact (changeover). Rated voltage: 230 VAC lightning test current (10/350 µs): 25 kA protection level with lightning test current < 1.6 kV 25 kA short-circuit withstand rating with max. back-up fuse of 250 A gl telecommunication output: contact: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU I 2 R LCF 280 V/25 kA Order No. 1351620000 or equivalent
Short specification: Class I arrester for LPL I with 25 kA suitable for 230/400 V single-phase TN mains systems. Protection level < 1.6 kV. With remote alert Type: Weidmüller VPU I 2 R LCF 280 V/25 kA Order no. 1351620000 or equivalent

Classifications

ETIM 6.0: EC000941
ETIM 7.0: EC000941
EClass 9.0: 27-13-08-05
EClass 9.1: 27-13-08-05
EClass 10.0: 27-13-08-05
UNSPSC: 30-21-19-22

Connection Data, Remote Alert

Connection type: PUSH IN
Stripping length: 8 mm
Cross-section for connected wire, solid core, min.: 0.14 mm²
Cross-section for connected wire, solid core, max.: 1.5 mm²

Temperatures

Humidity: 5 - 95% rel. humidity
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C

Related products