2467170000

PRO TOP3 960W 48V 20A

2467170000

2467170000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

2482,62 zł

1

Payment methods:

Product Conditions:

New Surplus

Availability:: 0 pcs.
On Request

2482,62 złfor 1 pc..

Updated at 28.09.2024

Offer with manufacturer lead time

Ships in:On Request

Best price:

€446.50

Additional Information

Part Number: 2467170000

General Data

AC failure bridging time @ I: > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Conformal coating: No
Degree of efficiency: 95,3 %
Derating: > 60°C (2.5% / 1°C)
Earth leakage current, max.: 3.5 mA
Housing version: Metal, corrosion resistant
MTBF: > 1.000.000 h according IEC 1709 (SN29500)
Mounting position, installation notice: Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load
Operating temperature: -25 °C...70 °C
Power factor (approx.): > 0.75 @ 3x400 V AC
Protection degree: IP20
Series switching capability: No
Short-circuit protection: Yes, internal
Start-up: ≥ -40 °C
Surge voltage category: III

Signalling

LED green/red: Green: Operation (failure-free), Flashing green: advance warning I>90%, Green/red flashing: output switched off (switch-off mode), Flashing red: overload/error

Connection Data (Input)

Conductor cross-section, AWG/kcmil , max.: 4
Conductor cross-section, AWG/kcmil , min.: 20
Conductor cross-section, flexible , min.: 0.75 mm²
Conductor cross-section, rigid , max.: 16 mm²
Conductor cross-section, rigid , min.: 0.75 mm²
Connection system: PUSH IN
Number of terminals: 4 for L1/L2/L3/PE
Wire connection cross section, flexible (input), max.: 16 mm²

Approvals

Approvals: CULUS, CULUSEX, TUEV
ROHS: Conform
UL File Number Search: E258476

Dimensions And Weights

Width: 89 mm
Width (inches): 3.504 inch
Height: 130 mm
Height (inches): 5.118 inch
Depth: 175 mm
Depth (inches): 6.89 inch
Weight: 2,490 g
Net weight: 2,490 g

Electrical Safety (Applied Standards)

Electrical machine equipment: Acc. to EN60204
For use with electronic equipment: Acc. to EN50178 / VDE0160
Protection against dangerous shock currents: Acc. to VDE0106-101
Protective separation / protection against electrical shock: VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage: SELV according to EN 60950, PELV according to EN 60204
Safety transformers for switch-mode power supplies: According to EN 61558-2-16

Emc / Shock / Vibration

Vibration resistance IEC 60068-2-6: 2.3 g (on DIN rail), 4 g (with direct mounting)
Interference immunity test acc. to: EN 55024, EN 55032 (EN 55022), EN 61000-6-1, 2, 3, 4
Shock resistance IEC 60068-2-27: 30 g in all directions

Input

AC input voltage range: 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
Connection system: PUSH IN
DC input voltage range: 450...800 V DC (max. 500 V DC acc. to UL508)
Frequency range AC: 45…65 Hz
Input fuse (internal): No
Inrush current: Max. 10 A
Rated input voltage: 3 x 400...3 x 500 V AC (wide-range input)
Recommended back-up fuse: 6 - 8 A, Char. C
Surge protection: Varistor

Classifications

ETIM 6.0: EC002540
ETIM 7.0: EC002540
EClass 9.0: 27-04-07-01
EClass 9.1: 27-04-07-01
EClass 10.0: 27-04-07-01

Output

DCL - peak load reserve: 150 % (5 s); 400 % (15 ms)
Connection system: PUSH IN
Mains failure bridge-over time: > 20 ms @ 115V AC/ 230 VAC
Nominal output current for U: 20 A @ 60 °C
Output power: 960 W
Output voltage: 45...56 V
Parallel connection option: yes, max 10
Protection against inverse voltage: Yes
Ramp-up time: ≤ 100 ms
Rated output voltage: 48 V DC ± 1 %
Reserve capacity @ U: 130% permanent at ≤ 40°C, 150 % (5 s)
Residual ripple, breaking spikes: < 50 mVss @ UNenn, Full Load
Triggerable circuit breakers: C2, C4, C6, B6, B10

Connection Data (Signal)

Wire connection cross-section, flexible (signal), max.: 1.5 mm²
Wire connection cross-section, flexible (signal), min.: 0.14 mm²
Wire connection method: PUSH IN
Wire cross-section, AWG/kcmil , max.: 16
Wire cross-section, AWG/kcmil , min.: 26
Wire cross-section, solid , max.: 1.5 mm²
Wire cross-section, solid , min.: 0.14 mm²

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Insulation Coordination

Humidity at operating temperature: 5...95 %, no condensation
Insulation voltage input / earth: 3.2 kV
Insulation voltage output / earth: 0.5 kV
Insulation voltage, input/output: 3.5 kV
Pollution severity: 2
Protection class: I, with PE connection
Surge voltage category: III

Connection Data (Output)

Conductor cross-section, AWG/kcmil , max.: 4
Conductor cross-section, AWG/kcmil , min.: 20
Conductor cross-section, flexible , max.: 16 mm²
Conductor cross-section, flexible , min.: 0.75 mm²
Conductor cross-section, rigid , max.: 16 mm²
Conductor cross-section, rigid , min.: 0.75 mm²
Connection system: PUSH IN
Number of terminals: 4 (++ / --)

Temperatures

Humidity at operating temperature: 5...95 %, no condensation
Operating temperature, max.: 70 °C
Operating temperature, min.: -25 °C
Storage temperature, max.: 85 °C
Storage temperature, min.: -40 °C
Operating temperature: -25 °C...70 °C
Storage temperature: -40 °C...85 °C

Ratings Iecex/Atex/Cul

Certificate no. (cULus): E258476

Related products