Weidmuller
2576190000
DRIKITP 24VDC 2CO LD/PB
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 11 Parts In-Stock from 8 Distributors
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
€5.10
Additional Information
- Part Number
- 2576190000
General Data
- Rail
- TS 35
- Test button
- yes (lockable)
- Mechanical switch position indicator
- Yes
- Colour
- black
Approvals
- Approvals
- CE, EAC
Dimensions And Weights
- Width
- 15.9 mm
- Width (inches)
- 0.626 inch
- Height
- 102.1 mm
- Height (inches)
- 4.02 inch
- Depth
- 63 mm
- Depth (inches)
- 2.48 inch
- Net weight
- 60.258 g
Connection Data
- Wire connection method
- PUSH IN with actuator
- Stripping length, rated connection
- 10 mm
- Clamping range, rated connection
- 1.5 mm²
- Clamping range, min.
- 0.14 mm²
- Clamping range, max.
- 1.5 mm²
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 16
- Wire cross-section, solid, min.
- 0.14 mm²
- Wire cross-section, solid, max.
- 1.5 mm²
- Wire connection cross-section, finely stranded, min.
- 0.14 mm²
- Wire connection cross section, finely stranded, max.
- 1.5 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
- 0.14 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
- 1 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.
- 0.14 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.
- 1.5 mm²
- Blade size
- 0.4 x 2.5 mm
Contact Data
- Contact type
- 2 CO contact with test button (AgNi)
- Mechanical service life
- 10 x 106 switching cycles
Input
- Rated control voltage
- 24 V DC
- Rated current DC
- 21,8 mA
- Power rating
- 530 mW
- Pull-in/drop-out voltage, typ.
- 18 V / 3.6 V DC
- Coil resistance
- 1100 Ω ± 10 %
- Status indicator
- Green LED
- Protective circuit
- Free-wheeling diode
Classifications
- ETIM 6.0
- EC001437
- ETIM 7.0
- EC001437
- EClass 9.0
- 27-37-16-01
- EClass 9.1
- 27-37-16-01
- EClass 10.0
- 27-37-16-01
Output
- Rated switching voltage
- 250 V AC
- Max. switching voltage, AC
- 250 V
- Max. switching voltage, DC
- 250 V
- Continuous current
- 5 A
- AC switching capacity (resistive), max.
- 1250 VA
- DC switching capacity (resistive), max.
- 150 W @ 24 V
- Switch-on delay
- ≤ 15 ms
- Switch-off delay
- ≤ 10 ms
- Min. switching power
- 10 mA @ 12 V, 100 mA @ 5 V
- Max. switching frequency at rated load
- 0.1 Hz
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Rated voltage
- 250 V
- Surge voltage category
- III
- Pollution severity
- 2
- Insulating material group
- IIIb
- Protection degree
- IP20
- Dielectric strength, Input/Output
- 5 kVeff / 1min
- Creepage and clearance distance input – output
- ≥ 3 mm
- Dielectric strength of neighbouring contacts
- 1.5 kVeff /1 min.
- Impulse withstand voltage at neighbouring contacts
- 4.8 kV (1.2/50 µs)
- Dielectric strength of open contact
- 1 kVeff / 1 min
- Impulse withstand voltage
- 5 kV (1.2/50 µs)
Temperatures
- Humidity
- 35...85 % rel. humidity, no condensation
- Operating temperature, max.
- 55 °C
- Operating temperature, min.
- -40 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -40 °C...55 °C
- Storage temperature
- -40 °C...85 °C
Further Details Of Approvals / Standards
- Standards
- IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011
- Certificate no. (cURus) relay
- E312083
- Certificate no. (cURus) base
- E312083
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther