Weidmuller
7760054115
ACT20P-CI-2CO-S
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
€183.02
1
Payment methods:
A total of 24 Parts In-Stock from 15 Distributors
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
€131.76
Additional Information
- Part Number
- 7760054115
General Data
- Accuracy
- < 0.1 % of end value
- Configuration
- none
- Current consumption
- ≤60 mA (24V power supply, 20mA output)
- Galvanic isolation
- 3-way isolator, between input ⁄ output ⁄ supply
- Rail
- TS 35
- Step response time
- ≤ 0,5 ms
- Temperature coefficient
- 80 ppm/K
- Voltage supply
- 20…30 V DC
Approvals
- Approvals
- CE, CULUS, EAC
- ROHS
- Conform
- UL File Number Search
- E366074
Dimensions And Weights
- Width
- 12.5 mm
- Width (inches)
- 0.492 inch
- Height
- 117.2 mm
- Height (inches)
- 4.614 inch
- Depth
- 113.7 mm
- Depth (inches)
- 4.476 inch
- Weight
- 157 g
- Net weight
- 157 g
Connection Data
- Type of connection
- Screw connection
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.6 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 12
Input
- Number of inputs
- 1
- Sensor supply
- > 17 V DC at 20 mA, max 30 V @ open circuit, max 50 mA @ short-circuit
- Input signal
- 2-/3-wire transmitter, HART signal® bidirectional
- Input current
- 0...20 mA, 4…20mA
- Voltage drop
- ca. 3.8 V @ RLoad = 0 Ω; ca. 15 V @ RLoad = 600 Ω; (Iinput = 20 mA)
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-20
- EClass 10.0
- 27-21-01-20
Output
- Number of outputs
- 2
- Output current
- 0...20 mA, 4...20 mA, HART® digital signal
- Load impedance current
- < 300 Ω
Product Information
- Product information
- The non-adjustable DC isolating amplifier ACT20P-CI-2CO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is converted linearly and doubled to provide two galvanically isolated output current signals. The power supply is galvanically isolated from the input and output (4-way isolation). Properties HART-compatible for 0.5 - 2.5 kHz The active or passive mA signal inputs are fully galvanically isolated. Operating status display on a front panel LED Galvanic 4-way isolation between input, output and supply.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- EMC standards
- EN 61010-1:2011, UL 61010-1, EN 61326-1
- Galvanic isolation
- 3-way isolator, between input ⁄ output ⁄ supply
- Impulse withstand voltage
- 4 kV (1.2/50 µs)
- Insulation voltage
- 2 kV inputs / outputs / power supply
- Insulation voltage input or output/supply
- 2 kV inputs / outputs / power supply
- Pollution severity
- 2
- Surge voltage category
- III
Temperatures
- Humidity
- 5...95 %, no condensation
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -20 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -20 °C...60 °C
- Storage temperature
- -40 °C...85 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E366074
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther